Hair
Cold Rolled Steel Sheet
As you can understand from the name, boiler sheets are the type of steel plate used in boiler manufacturing. They are generally used in the internal structures of boilers. Boiler steels are used in the manufacture of boiler sheets, pressure vessels and boilers due to their excellent forming and weldability properties, which are reasonable for use under high temperature and pressure. It is possible to use up to continuous operation up to about 450 ° C and wall temperatures up to 450 ° C. Boiler sheets are pressure resistant steels. Commercial grade steels start with the S grade designation, for example S235JR, while boiler sheets are P group steels. P235GH quality .P265GH quality, P355GH grades, 16M03 Quality P295GH Quality, P355NH Quality, P355NL1 quality, there are varieties according to different strengths.
P235GH Quality boiler steel sheets are produced only by Erdemir in Turkey. P235GH Quality steel sheets Erdemir quality equivalent is 6335 quality.
Quality
Chemical analysis of P235GH (6335) quality sheets
Non-alloy Boiler Steels Suitable for Use Under High Temperature and Pressure Standard : EN 10028-2:2017
Standard Provision | ERDEMİR Quality No | C | Si max. | Mn | P max. | S max. | Al min. | N(3) max. | Cr(1) max. | Cu(1) max. | Mo(1) max. | Nb max. | Ni(1) max. | Ti max. | V max. | |
Standard | Quality | |||||||||||||||
EN 10028-2 | P235GH | 6335(2) | 0.16 max. | 0.35 | 0.60-1.20 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P265GH | 6341(2) | 0.20 max. | 0.40 | 0.80-1.40 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P295GH | 63472 | 0.08 - 0.20 | 0.40 | 0.90-1.50 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.02 | 0.03 | 0.02 |
EN 10028-2 | P355GH | 6352 | 0.10 - 0.22 | 0.60 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.040 | 0.30 | 0.03 | ||
Explanations
1) The sum of Cr + Cu + Mo + Ni should be max. %0,70.
2) For thicknesses thinner than 6 mm, the minimum Mn content may be reduced by %0,20.
Al/N > 2 ratio is applied.
Mechanical Properties
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Quality No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<50 min. | d<16 min. | 16<d<40 min. | 40<d<50 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | P235GH | 6335 | 235 ( 24.0 ) | 225 ( 22.9 ) | 215 ( 21.9 ) | 360 - 480 ( 36.7 - 49.0 ) | 24 | -20 | 27 | 153 (15.6) | 147 (15.0) | 140 (14.3) |
EN 10028-2 | P265GH | 6341 | 265 ( 27.0 ) | 255 ( 26.0 ) | 245 ( 25.0 ) | 410 - 530 ( 41.8 - 54.1 ) | 22 | -20 | 27 | 173 (17.6) | 166 (16.9) | 160 (16.3) |
EN 10028-2 | P295GH | 6347 | 295 ( 30.1 ) | 290 ( 29.6 ) | 285 ( 29.1 ) | 460 - 580 ( 46.9 - 59.2 ) | 21 | -20 | 27 | 192 (19.6) | 189 (19.3) | 186 (19.0) |
EN 10028-2 | P355GH | 6352 | 355 ( 36.2 ) | 345 ( 35.2 ) | 335 ( 34.2 ) | 510 - 650 ( 52.0 - 66.3 ) | 20 | -20 | 27 | 232 (23.7) | 225 (22.9) | 219 (22.3) |
Explanations
- Tensile test values are applied to ‘transverse’ test specimens,
- Hot tensile test is available upon request.
- Impact test is not performed for products with a thickness of less than 6 mm.
- Depending on the agreement, a minimum impact energy value of 40 J can be requested.
Chemical analysis of P265GH (6341) quality boiler sheets
Non-alloy Boiler Steels Suitable for Use Under High Temperature and Pressure
Standard : EN 10028-2:2017
Chemical Composition (%) | ||||||||||||||||
Standard Provision | ERDEMİR Quality No | C | Si max. | Mn | P max. | S max. | Al min. | N(3) max. | Cr(1) max. | Cu(1) max. | Mo(1) max. | Nb max. | Ni(1) max. | Ti max. | V max. | |
Standard | Quality | |||||||||||||||
EN 10028-2 | P235GH | 6335(2) | 0.16 max. | 0.35 | 0.60-1.20 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P265GH | 6341(2) | 0.20 max. | 0.40 | 0.80-1.40 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P295GH | 63472 | 0.08 - 0.20 | 0.40 | 0.90-1.50 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P355GH | 6352 | 0.10 - 0.22 | 0.60 | 1.10-1.70 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.040 | 0.30 | 0.03 | 0.02 |
ERDEMİR quality of P265GH quality pressure resistant sheets is 6341.
Explanations
- The sum of Cr + Cu + Mo + Ni should be max. %0,70.
- For thicknesses thinner than 6 mm, the minimum Mn content can be reduced by %0,20. Al/N > 2 ratio is applied. starting from mm.
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Quality No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<50 min. | d<16 min. | 16<d<40 min. | 40<d<50 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | P235GH | 6335 | 235 ( 24.0 ) | 225 ( 22.9 ) | 215 ( 21.9 ) | 360 - 480 ( 36.7 - 49.0 ) | 24 | -20 | 27 | 153 (15.6) | 147 (15.0) | 140 (14.3) |
EN 10028-2 | P265GH | 6341 | 265 ( 27.0 ) | 255 ( 26.0 ) | 245 ( 25.0 ) | 410 - 530 ( 41.8 - 54.1 ) | 22 | -20 | 27 | 173 (17.6) | 166 (16.9) | 160 (16.3) |
EN 10028-2 | P295GH | 6347 | 295 ( 30.1 ) | 290 ( 29.6 ) | 285 ( 29.1 ) | 460 - 580 ( 46.9 - 59.2 ) | 21 | -20 | 27 | 192 (19.6) | 189 (19.3) | 186 (19.0) |
EN 10028-2 | P355GH | 6352 | 355 ( 36.2 ) | 345 ( 35.2 ) | 335 ( 34.2 ) | 510 - 650 ( 52.0 - 66.3 ) | 20 | -20 | 27 | 232 (23.7) | 225 (22.9) | 219 (22.3) |
Explanations
- Tensile test values are applied to ‘transverse’ test specimens,
- Hot tensile test is available upon request.
- Impact test is not performed for products with a thickness of less than 6 mm.
- Depending on the agreement, a minimum impact energy value of 40 J can be requested.
ERDEMİR quality of P265GH quality pressure resistant sheets is 6341. The production range of Erdemir 6341 quality boiler sheets starts from 4mm.
| ||||||||||||||||
Standard Provision | ERDEMİR Quality No | C | Si max. | Mn | P max. | S max. | Al min. | N(3) max. | Cr(1) max. | Cu(1) max. | Mo(1) max. | Nb max. | Ni(1) max. | Ti max. | V max. | |
Standard | Quality | |||||||||||||||
EN 10028-2 | P235GH | 6335(2) | 0.16 max. | 0.35 | 0.60-1.20 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P265GH | 6341(2) | 0.20 max. | 0.40 | 0.80-1.40 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P295GH | 63472 | 0.08 - 0.20 | 0.40 | 0.90-1.50 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P355GH | 6352 | 0.10 - 0.22 | 0.60 | 1.10-1.70 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.040 | 0.30 | 0.03 | 0.02 |
ERDEMİR quality of P265GH quality pressure resistant sheets is 6341. The production range of Erdemir 6341 quality boiler sheets starts from 4mm.
Explanations
- The sum of Cr + Cu + Mo + Ni should be max. %0,70.
- For thicknesses thinner than 6 mm, the minimum Mn content may be reduced by %0.20. Al/N > 2 ratio is applied.
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Quality No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<50 min. | d<16 min. | 16<d<40 min. | 40<d<50 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | P235GH | 6335 | 235 ( 24.0 ) | 225 ( 22.9 ) | 215 ( 21.9 ) | 360 - 480 ( 36.7 - 49.0 ) | 24 | -20 | 27 | 153 (15.6) | 147 (15.0) | 140 (14.3) |
EN 10028-2 | P265GH | 6341 | 265 ( 27.0 ) | 255 ( 26.0 ) | 245 ( 25.0 ) | 410 - 530 ( 41.8 - 54.1 ) | 22 | -20 | 27 | 173 (17.6) | 166 (16.9) | 160 (16.3) |
EN 10028-2 | P295GH | 6347 | 295 ( 30.1 ) | 290 ( 29.6 ) | 285 ( 29.1 ) | 460 - 580 ( 46.9 - 59.2 ) | 21 | -20 | 27 | 192 (19.6) | 189 (19.3) | 186 (19.0) |
EN 10028-2 | P355GH | 6352 | 355 ( 36.2 ) | 345 ( 35.2 ) | 335 ( 34.2 ) | 510 - 650 ( 52.0 - 66.3 ) | 20 | -20 | 27 | 232 (23.7) | 225 (22.9) | 219 (22.3) |
Chemical Composition (%) | ||||||||||||||||
Standard Provision | ERDEMİR Quality No | C | Si max. | Mn | P max. | S max. | Al min. | N(3) max. | Cr(1) max. | Cu(1) max. | Mo(1) max. | Nb max. | Ni(1) max. | Ti max. | V max. | |
Standard | Quality | |||||||||||||||
EN 10028-2 | P235GH | 6335(2) | 0.16 max. | 0.35 | 0.60-1.20 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P265GH | 6341(2) | 0.20 max. | 0.40 | 0.80-1.40 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P295GH | 63472 | 0.08 - 0.20 | 0.40 | 0.90-1.50 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.020 | 0.30 | 0.03 | 0.02 |
EN 10028-2 | P355GH | 6352 | 0.10 - 0.22 | 0.60 | 1.10-1.70 | 0.025 | 0.010 | 0.020 | 0.012 | 0.30 | 0.30 | 0.08 | 0.040 | 0.30 | 0.03 | 0.02 |
ERDEMİR quality of P265GH quality pressure resistant sheets is 6341. The production range of Erdemir 6341 quality boiler sheets starts from 4mm.
Explanations
- The sum of Cr + Cu + Mo + Ni should be max. %0,70.
- For thicknesses thinner than 6 mm, the minimum Mn content can be reduced by %0,20.
- Al/N > 2 ratio is applied.
ERDEMİR quality equivalent of P355GH quality steels is 6352 quality. Erdemir 6352 quality boiler sheets have a very high resistance to pressure as strength. In addition, there are steels used in pressure resistant pipe making produced by Erdemir.
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Quality No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<50 min. | d<16 min. | 16<d<40 min. | 40<d<50 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | P235GH | 6335 | 235 ( 24.0 ) | 225 ( 22.9 ) | 215 ( 21.9 ) | 360 - 480 ( 36.7 - 49.0 ) | 24 | -20 | 27 | 153 (15.6) | 147 (15.0) | 140 (14.3) |
EN 10028-2 | P265GH | 6341 | 265 ( 27.0 ) | 255 ( 26.0 ) | 245 ( 25.0 ) | 410 - 530 ( 41.8 - 54.1 ) | 22 | -20 | 27 | 173 (17.6) | 166 (16.9) | 160 (16.3) |
EN 10028-2 | P295GH | 6347 | 295 ( 30.1 ) | 290 ( 29.6 ) | 285 ( 29.1 ) | 460 - 580 ( 46.9 - 59.2 ) | 21 | -20 | 27 | 192 (19.6) | 189 (19.3) | 186 (19.0) |
EN 10028-2 | P355GH | 6352 | 355 ( 36.2 ) | 345 ( 35.2 ) | 335 ( 34.2 ) | 510 - 650 ( 52.0 - 66.3 ) | 20 | -20 | 27 | 232 (23.7) | 225 (22.9) | 219 (22.3) |
Explanations
- Tensile test values are applied to ‘transverse’ test specimens,
- Hot tensile test is available upon request.
- Impact test is not performed for products with a thickness of less than 6 mm.
- Depending on the agreement, a minimum impact energy value of 40 J can be requested.
16MO3 (6345) Chemical analysis of quality boiler sheets
Alloy Steel Suitable for Use Under High Temperature and Pressure
Standard : EN 10028-2:2017
Chemical Composition (%) | ||||||||||||
Standard Provision | ERDEMİR Quality No | C | Mn | P max. | S max. | Si max. | N max. | Cr max. | Cu max. | Mo | Ni max. | |
Standard | Quality | |||||||||||
EN 10028-2 | 16Mo3 | 6345(1) | 0.12-0.20 | 0.40-0.90 | 0.025 | 0.010 | 0.35 | 0.012 | 0.30 | 0.30 | 0.25-0.35 | 0.30 |
Explanations
1) Products of this quality are produced in full stagnation. Therefore Al/N has a minimum ratio of 2:1
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Kaite No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<60 min. | d<16 min. | 16<d<40 min. | 40<d<60 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | 16Mo3 | 6345 | 275 ( 28.1 ) | 270 ( 27.6 ) | 260 ( 26.5 ) | 440 - 590 ( 44.9 - 60.2 ) | 22 | 20 | 31 | 194 ( 19.8 ) | 190 ( 19.4 ) | 183 ( 18.7 ) |
Explanations
1-Tensile test values are applied to ‘transverse’ test specimens.
2-Hot tensile test is optional.
3-Impact test is not performed for products with a thickness of less than 6 mm.
4-Depending on the agreement, a minimum pulse energy value of 40 J can be requested.
Chemical Composition (%) | ||||||||||||
Standard Provision | ERDEMİR Quality No | C | Mn | P max. | S max. | Si max. | N max. | Cr max. | Cu max. | Mo | Ni max. | |
Standard | Quality | |||||||||||
EN 10028-2 | 16Mo3 | 6345(1) | 0.12-0.20 | 0.40-0.90 | 0.025 | 0.010 | 0.35 | 0.012 | 0.30 | 0.30 | 0.25-0.35 | 0.30 |
Explanations
1) These quality products are produced in full stop. Therefore, the minimum Al/N ratio is 2:1.
Mechanical Properties | ||||||||||||
Standard Provision | ERDEMİR Kaite No | Re N/mm2 (kg/mm2) | Rm(1) N/mm2 (kg/mm2) | A5 (%) min. | Impact(3)(4) (Transverse) | Rp0.2(1)(2) N/mm2 (kg/mm2) Temperature= 300°C | ||||||
Temperature. °C | KVc min. J | |||||||||||
d<16 min. | 16<d<40 min. | 40<d<60 min. | d<16 min. | 16<d<40 min. | 40<d<60 min. | |||||||
Standard | Quality | |||||||||||
EN 10028-2 | 16Mo3 | 6345 | 275 ( 28.1 ) | 270 ( 27.6 ) | 260 ( 26.5 ) | 440 - 590 ( 44.9 - 60.2 ) | 22 | 20 | 31 | 194 ( 19.8 ) | 190 ( 19.4 ) | 183 ( 18.7 ) |
Explanations
- Tensile test values are applied to ‘transverse’ test specimens.
- Hot tensile test is available upon request.
- Impact test is not performed for products with a thickness of less than 6 mm.
- Depending on the agreement, a minimum impact energy value of 40 J can be requested.
ERDEMİR quality equivalent of P355GH quality steels is 6352 quality. Erdemir 6352 quality boiler sheets have a very high resistance to pressure as strength. In addition, there are steels used in pressure resistant pipe making produced by Erdemir.
Areas of Use
-In the manufacture of transport vehicles (ships, trains, lorries, trucks, buses, bicycles)
-In the energy sector; energy transmission lines, wind power generation equipment, power plant construction, solar energy utilisation equipment
-In the agricultural sector; in the construction of pipes used in agricultural machinery, in the construction of canals, tunnels, dams, bridges, harbours, in the control of the great power of water
-Storage systems, silo construction, container manufacturing
-In hot and pressurised environments, heat heat exchangers in the manufacture of steam boilers
It is successfully used in the construction industry in the construction of load-bearing columns, concrete conveying, mixing and moulding equipment, and in the construction of steel buildings.
Weight Ruler
THICKNESS | m2 | THICKNESS | m2 |
|
|
|
|
mm | Weight | mm | Weight |
0,40 | 3,140 | 6,00 | 47,100 |
0,50 | 3,925 | 7,00 | 54,950 |
0,60 | 4,710 | 8,00 | 62,800 |
0,70 | 5,495 | 9,00 | 70,650 |
0,80 | 6,280 | 10,00 | 78,500 |
0,90 | 7,065 | 12,00 | 94,200 |
1,00 | 7,850 | 15,00 | 117,750 |
1,20 | 9,420 | 20,00 | 157,000 |
1,50 | 11,775 | 25,00 | 196,250 |
2,00 | 15,700 | 30,00 | 235,500 |
2,50 | 19,625 | 35,00 | 274,750 |
3,00 | 23,550 | 40,00 | 314,000 |
4,00 | 31,400 | 50,00 | 392,500 |
5,00 | 39,250 | 80,00 | 628,000 |