{"id":3783,"date":"2023-02-10T12:43:26","date_gmt":"2023-02-10T09:43:26","guid":{"rendered":"https:\/\/torosdemir.com\/?page_id=3783"},"modified":"2025-10-20T17:15:55","modified_gmt":"2025-10-20T14:15:55","slug":"round-flat-construction-irons","status":"publish","type":"page","link":"https:\/\/torosdemir.com\/en_gb\/round-flat-construction-irons\/","title":{"rendered":"Round Flat Rebars"},"content":{"rendered":"
\n\t\t\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Rebars for construction<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Round Flat Rebars<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Round flat construction irons, also called as shafts, are manufactured by hot rolling technique and presented for sale. After the hot rolling procedure, it is drawn from cold moulds and made into bars. In this way, it gains its durable and long-lasting form. Their durable chemical structure, corrosion resistance and flat surface make them suitable for use in construction and industrial areas. It provides a strong grip especially in concrete structures and a suitable working environment for other installations. These products, which mostly remain in the concrete structure, maintain their form and chemical structure for many years without the need for maintenance and repair. In this way, it ensures that concrete structures, in which people spend a great deal of time in their daily life, cultural, business and educational life, become stronger, balanced and durable.\n\nRebars of all sizes produced are highly resistant to tensile rupture. These products, which have extremely high impact and corrosion resistance, become preferable with their shrinkage and expansion properties.<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Quality : S235JR - S275JR - S355JR<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Standard : ASTM A572 GRADE 50 (AST) - ASTM A615 Grade 40 (AST) - ASTM A615 Grade 60 (AST) - EN 10060<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Diameter : 1.00 - 28.00 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Areas of Use<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tWhile forming reinforced concrete elements such as foundation beam, column, beam, slab, curtain and raft, concrete meets compressive stresses and rebar meets tensile stresses. In order to increase the tensile strength of rebar, notches are made on the edges. Rebars with notches made in this way are called ribbed rebar. In our country, rebar is available in the market between 8 and 60 mm diameter and 12 m length. Iron traders generally make the bonds in 2000 -2500 kg.\n\nRound flat rebar has high strength and is used in highly important reinforced concrete structures with its welding and folding properties. Ribbed rebar is definitely used in structures that require special design such as skyscrapers, dams, subways, motorways. Due to its low price and high strength additives, ribbed rebar is one of the biggest components of the structures.\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Quality<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

DIAMETER MM | INCH (A)<\/em><\/p><\/td><\/tr>

\u00a06,0 | 1\/4\u2033<\/em><\/p><\/td>

7,0<\/em><\/p><\/td>

8,0 | 5\/16\u2033<\/em><\/p><\/td>

9,0<\/em><\/p><\/td>

10,0 | 3\/8\u2033<\/em><\/p><\/td>

11,0 | 7\/16\u2033<\/em><\/p><\/td>

12,0 | 1\/2\u2033<\/em><\/p><\/td>

13,0<\/em><\/p><\/td><\/tr>

\u00a014,0<\/em><\/p><\/td>

15,0<\/em><\/p><\/td>

16,0 | 5\/8\u2033<\/em><\/p><\/td>

18,0<\/em><\/p><\/td>

19,0 | 3\/4\u2033<\/em><\/p><\/td>

20,0<\/em><\/p><\/td>

22,0 | 7\/8\u2033<\/em><\/p><\/td>

25,0 | 1\u2033<\/em><\/p><\/td><\/tr>

\u00a026,0<\/em><\/p><\/td>

27,0<\/em><\/p><\/td>

28,0<\/em><\/p><\/td>

30,0<\/em><\/p><\/td>

32,0 | 1.1\/4\u2033<\/em><\/p><\/td>

33,0<\/em><\/p><\/td>

34,0<\/em><\/p><\/td>

35,0<\/em><\/p><\/td><\/tr>

\u00a036,0<\/em><\/p><\/td>

38,0 | 1.1\/2\u2033<\/em><\/p><\/td>

40,0<\/em><\/p><\/td>

45,0 | 1.3\/4\u2033<\/em><\/p><\/td>

50,0 | 2\u2033<\/em><\/p><\/td>

\u00a055,0<\/em><\/p><\/td>

60,0<\/em><\/p><\/td>

65,0 | 2.1\/2\u2033<\/em><\/p><\/td><\/tr>

70,0<\/em><\/p><\/td>

75,0 | 3\u2033<\/em><\/p><\/td>

80,0<\/em><\/p><\/td>

\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td><\/tr><\/tbody><\/table><\/div>

S235JR 5437 QUALITY MECHANICAL PROPERTIES<\/strong><\/p>

Mechanical Properties<\/strong><\/p><\/td><\/tr>

\u00a0<\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p>

Quality No<\/p><\/td>

Re (min) N\/mm2\u00a0<\/sup>( kg\/mm2<\/sup>\u00a0) d(thickness, mm)<\/p><\/td>

Rm(1)<\/sup><\/p>

N\/mm2\u00a0<\/sup>( kg\/mm2<\/sup>\u00a0) d(thickness, mm)<\/p><\/td>

A (%) min.<\/p>

d(thickness, mm)<\/p><\/td>

Impact (3) (Longitudinal)<\/p><\/td><\/tr>

A80<\/p><\/td>

A5<\/p><\/td><\/tr>

<16<\/p><\/td>

>16<\/p>

<40<\/p><\/td>

>40<\/p>

<63<\/p><\/td>

>63<\/p>

<80<\/p><\/td>

>80<\/p>

<100<\/p><\/td>

<3<\/p><\/td>

>3<\/p>

<100<\/p><\/td>

>1<\/p>

<1.5<\/p><\/td>

>1.5<\/p>

<2<\/p><\/td>

>2<\/p>

<2.5<\/p><\/td>

>2.5<\/p>

<3<\/p><\/td>

>3<\/p>

<40<\/p><\/td>

>40<\/p>

<63<\/p><\/td>

>63<\/p>

<100<\/p><\/td>

Temperature.<\/p>

\u00b0C<\/p><\/td>

KVc<\/p>

J(min.)<\/p><\/td><\/tr>

Standard<\/p><\/td>

Quality\u201981<\/sup><\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S235JR+AR CTB<\/p><\/td>

5437<\/p><\/td>

235 (24.0)<\/p><\/td>

225 (23.0)<\/p><\/td>

215<\/p>

(21.9)<\/p><\/td>

215 (21.9)<\/p><\/td>

215<\/p>

(21.9)<\/p><\/td>

360-510 (36.7-52.0)<\/p><\/td>

360-510 (36.7-52.0)<\/p><\/td>

16<\/p><\/td>

17<\/p><\/td>

18<\/p><\/td>

19<\/p><\/td>

24<\/p><\/td>

23<\/p><\/td>

22<\/p><\/td>

+20<\/p><\/td>

272)<\/p><\/td><\/tr><\/tbody><\/table><\/div>

S275JR 3244 CHEMICAL COMPOSITION Standard: EN 10025-2:2019<\/strong><\/p>

Chemical Composition (%)<\/strong><\/p><\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p><\/td>

C d(thickness, mm)<\/p><\/td>

Mn<\/p><\/td>

P<\/p><\/td>

S<\/p><\/td>

Si<\/p><\/td>

Cu<\/p><\/td>

N(1)<\/p><\/td>

\u00a0<\/td>

CE(IIW)\u00a0(4)\u00a0<\/sup>max. (%)<\/p><\/td>

\u00a0<\/td><\/tr>
\u00a0<\/td>\u00a0<\/td>

Quality No<\/p><\/td>

<16<\/p><\/td>

16<d<40<\/p><\/td>

40<d<100<\/p><\/td>

\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>

d (mm)<\/p><\/td>

\u00a0<\/td><\/tr>

Standard<\/p><\/td>

Quality<\/p><\/td>

\u00a0<\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

<30<\/p><\/td>

30<d<40<\/p><\/td>

40<d<100<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S275JR+AR<\/p><\/td>

3244(1)<\/strong><\/p><\/td>

0.21<\/p><\/td>

0.21<\/p><\/td>

0.22<\/p><\/td>

1.50<\/p><\/td>

0.035<\/p><\/td>

0.035<\/p><\/td>

-<\/p><\/td>

0.55<\/p><\/td>

0.012<\/p><\/td>

0.40<\/p><\/td>

0.40<\/p><\/td>

0.42<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Max. Carbon equivalent (CEV) for S275 and S355 grades can be increased by %0.02 for %Si \u2264 0.04, %0.01 for %Si \u2264 0.25.<\/em><\/p>

S355JR 3252 CHEMICAL COMPOSITION Standard: EN 10025-2:2019<\/strong><\/p>

Chemical Composition (%)<\/strong><\/p><\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p><\/td>

C d(thickness, mm)<\/p><\/td>

Mn<\/p><\/td>

P<\/p><\/td>

S<\/p><\/td>

Si<\/p><\/td>

Cu<\/p><\/td>

N(1)<\/p><\/td>

\u00a0<\/td>

CE(IIW)\u00a0(4)\u00a0<\/sup>max. (%)<\/p><\/td>

\u00a0<\/td><\/tr>
\u00a0<\/td>\u00a0<\/td>

Quality No<\/p><\/td>

<16<\/p><\/td>

16<d<40<\/p><\/td>

40<d<100<\/p><\/td>

\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>\u00a0<\/td>

d (mm)<\/p><\/td>

\u00a0<\/td><\/tr>

Standard<\/p><\/td>

Quality<\/p><\/td>

\u00a0<\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

<30<\/p><\/td>

30<d<40<\/p><\/td>

40<d<100<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S355JR+AR<\/p><\/td>

3252(1)<\/strong><\/p><\/td>

0.24<\/p><\/td>

0.24<\/p><\/td>

0.24<\/p><\/td>

1.60<\/p><\/td>

0.035<\/p><\/td>

0.035<\/p><\/td>

0.55<\/p><\/td>

0.55<\/p><\/td>

0.012<\/p><\/td>

0.45<\/p><\/td>

0.47<\/p><\/td>

0.47<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Max. Carbon equivalent (CEV) for S275 and S355 grades can be increased by %0.02 for %Si \u2264 0.04, %0.01 for %Si \u2264 0.25.<\/em><\/p>

ASTM A572 CHEMICAL COMPOSITION<\/strong><\/p>

\u00a0<\/p>

Chemical Composition (%)<\/strong><\/p><\/td><\/tr>

\u00a0<\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p>

Quality No.<\/p><\/td>

C(3)\u00a0<\/sup>max.<\/p><\/td>

Mn(3)<\/sup><\/p><\/td>

P max.<\/p><\/td>

S max.<\/p><\/td>

Si(1)\u00a0<\/sup>max.<\/p><\/td>

Al(2)\u00a0<\/sup>min<\/p><\/td>

V max<\/p><\/td>

Cu(4)\u00a0<\/sup>min<\/p><\/td><\/tr>

CSA G40.21-<\/p>

ASTM A572<\/p><\/td>

300W\/350W- Gr50Tip2<\/p><\/td>

3246(5)<\/sup><\/p><\/td>

0.22<\/p><\/td>

0.80-1.35<\/p><\/td>

0.03<\/p><\/td>

0.03<\/p><\/td>

0.40<\/p><\/td>

-<\/p><\/td>

0.01-0.15<\/p><\/td>

0.20<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Explanations<\/strong><\/p>

  1. For products thicker than 40 mm, % Si should be 0.15-0.40.<\/li>
  2. When the total aluminium content is min. %0.020, the minimum value limitation for Si does not apply.<\/li>
  3. For every %0.01 decrease in the max. C value specified in the standard, the max. Mn value specified in the table can be increased by %0.06, provided that the Mn value is max. %1.50.<\/li>
  4. If \u201cCu\u201d is required in the chemical composition of the steel, the minimum value specified in the table applies.<\/li>
  5. These quality products are produced in full stagnation. Therefore, Al\/N is at a minimum ratio of 2:1.<\/li><\/ol>

    ASTM A572 MECHANICAL PROPERTIES<\/strong><\/p>

    Mechanical Properties<\/strong><\/p><\/td><\/tr>

    \u00a0<\/td><\/tr>

    Standard Provision<\/p><\/td>

    ERDEM\u0130R<\/p>

    Quality No.<\/p><\/td>

    Re(<\/strong>1<\/sup>)<\/strong><\/p>

    N\/mm2 ( kg\/mm2 )<\/p><\/td>

    Rm N\/mm2 (kg\/mm2<\/sup>)<\/p><\/td>

    A (%)<\/p><\/td>

    Impact(2)\u00a0<\/sup>(longitudinal)<\/p><\/td><\/tr>

    Temperature \u00b0C<\/p><\/td>

    KVc Joule min.<\/p><\/td><\/tr>

    Standard<\/p><\/td>

    Quality<\/p><\/td>

    d < 65 mm min.<\/p><\/td>

    65 < d < 100 mm. min.<\/p><\/td>

    A50\u00a0<\/strong>min.<\/p><\/td>

    A<\/sup>200\u00a0<\/strong>min.<\/p><\/td><\/tr>

    CSA G40.21- ASTM A572<\/p><\/td>

    300W\/350W- Gr50Tip2<\/p><\/td>

    3246(3)<\/strong><\/p><\/td>

    350<\/p><\/td>

    345<\/p><\/td>

    450-620<\/p><\/td>

    21<\/p><\/td>

    18<\/p><\/td>

    +20<\/p><\/td>

    27<\/p><\/td><\/tr>

    Explanations<\/strong><\/p>

    1)Tensile test values are applied to \u201cTransverse\u201d test specimens.<\/p>

    2)Impact test is optional. Under 6.00 mm thickness, impact test is not performed.<\/p>

    3)Elongation values below 8 mm thickness, according to clause 8.3.1.1 of CSA G40.20 standard, min. elongation values differ from the values specified in the table<\/p><\/td><\/tr><\/tbody><\/table><\/div>

    ASTM A36 CHEMICAL COMPOSITION<\/strong><\/p>

    Chemical Composition (%)<\/strong><\/p><\/td><\/tr>

    \u00a0<\/td><\/tr>

    Standard Provision<\/p><\/td>

    ERDEM\u0130R<\/p>

    Quality No<\/p><\/td>

    c(1)<\/sup><\/p>

    max.<\/p><\/td>

    Mn(1)<\/sup><\/p><\/td>

    P max.<\/p><\/td>

    S max.<\/p><\/td>

    Si\u00bb max.<\/p><\/td><\/tr>

    Standard<\/p><\/td>

    Quality<\/p><\/td><\/tr>

    ASTM A36-ABS<\/p><\/td>

    A36\/Gr.A<\/p><\/td>

    3741(3)<\/strong><\/p><\/td>

    0.21<\/p><\/td>

    0.80 - 1.20<\/p><\/td>

    0.030<\/p><\/td>

    0.030<\/p><\/td>

    0.40<\/p><\/td><\/tr><\/tbody><\/table><\/div>

    Explanations<\/strong><\/p>

    1. 1)\u2019c+(Mn\/6) < %0.40.<\/li>
    2. For materials with a thickness above 40 mm, the Si content should be min. %0.15.<\/li><\/ol>

      These quality products are produced in full stillness. Therefore Al\/N has a minimum ratio of 2:1<\/p>

      ASTM A36 MECHANICAL PROPERTIES<\/strong><\/p>

      Mechanical Properties<\/strong><\/p><\/td><\/tr>

      \u00a0<\/td><\/tr>

      Standard Provision<\/p><\/td>

      ERDEM\u0130R<\/p>

      Quality No<\/p><\/td>

      Re N\/mm2\u00a0<\/sup>( kg\/mm2<\/sup>\u00a0) min.<\/p><\/td>

      Rm\u2019<\/p>

      N\/mm2\u00a0<\/sup>( kg\/mm2<\/sup>\u00a0)<\/p><\/td>

      A.0 \u25a0<\/p>

      (%) d (Thickness, mm) min.<\/p><\/td>

      Impact(3)<\/sup>(Longitudinal)<\/p><\/td><\/tr>

      Temperature<\/p>

      \u00b0C<\/p><\/td>

      KVc (min.)<\/p>

      J<\/p><\/td><\/tr>

      Standard<\/p><\/td>

      Quality<\/p><\/td>

      50<d<=60<\/p><\/td><\/tr>

      ASTM A36-08\/ABS2-P2-14<\/p><\/td>

      A36\/Gr.A<\/p><\/td>

      3741<\/p><\/td>

      250<\/p>

      (25.5)<\/p><\/td>

      400 - 520 (40.8 - 53.0 )<\/p><\/td>

      22<\/p><\/td>

      20<\/p><\/td>

      34<\/p><\/td><\/tr><\/tbody><\/table><\/div>

      Explanations<\/strong><\/p>

      1. Tensile test values are applied to \u2018transverse\u2019 test specimens.<\/li>
      2. The % elongation values given in the table are valid for sheet products and products made of coil with 40,01<d(thickness)<60 mm. For sheet products, % elongation values for thicknesses of 40 mm and below are given below depending on the thickness.<\/li>
      3. 30<d<40 mm kal\u0131nl\u0131k aral\u0131\u011f\u0131nda min. %21<\/li>
      4. 25<d<30 mm kal\u0131nl\u0131klar aral\u0131\u011f\u0131nda min. %20<\/li>
      5. 20<d<25 mm kal\u0131nl\u0131klar aral\u0131\u011f\u0131nda min. %19<\/li>
      6. For thicknesses d<20 mm, min. % 18 should be.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t
        <\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
        \r\n\t\t\r\n\t\t\t\t\t\t\t
        \r\n\t\t\t\t\t\t\t\t\t\t\t
        \r\n\t\t\t\t\t
        \r\n\t\t\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        Weight Ruler<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        SIZE<\/strong><\/p><\/td>

        1mt.\/Kg.<\/strong><\/p><\/td>

        SIZE<\/strong><\/p><\/td>

        1mt.\/Kg<\/strong><\/p><\/td><\/tr>

        1,00<\/p><\/td>

        0,006<\/p><\/td>

        29,00<\/p><\/td>

        5,185<\/p><\/td><\/tr>

        1,50<\/p><\/td>

        0,014<\/p><\/td>

        30,00<\/p><\/td>

        5,549<\/p><\/td><\/tr>

        2,00<\/p><\/td>

        0,025<\/p><\/td>

        32,00<\/p><\/td>

        6,313<\/p><\/td><\/tr>

        2,50<\/p><\/td>

        0,039<\/p><\/td>

        34,00<\/p><\/td>

        7,127<\/p><\/td><\/tr>

        3,00<\/p><\/td>

        0,055<\/p><\/td>

        36,00<\/p><\/td>

        7,935<\/p><\/td><\/tr>

        3,50<\/p><\/td>

        0,076<\/p><\/td>

        38,00<\/p><\/td>

        8,903<\/p><\/td><\/tr>

        4,00<\/p><\/td>

        0,099<\/p><\/td>

        40,00<\/p><\/td>

        9,865<\/p><\/td><\/tr>

        4,50<\/p><\/td>

        0,125<\/p><\/td>

        45,00<\/p><\/td>

        12,485<\/p><\/td><\/tr>

        5,00<\/p><\/td>

        0,154<\/p><\/td>

        50,00<\/p><\/td>

        15,413<\/p><\/td><\/tr>

        6,00<\/p><\/td>

        0,222<\/p><\/td>

        55,00<\/p><\/td>

        18,650<\/p><\/td><\/tr>

        7,00<\/p><\/td>

        0,302<\/p><\/td>

        60,00<\/p><\/td>

        22,195<\/p><\/td><\/tr>

        8,00<\/p><\/td>

        0,395<\/p><\/td>

        65,00<\/p><\/td>

        26,050<\/p><\/td><\/tr>

        9,00<\/p><\/td>

        0,499<\/p><\/td>

        70,00<\/p><\/td>

        30,210<\/p><\/td><\/tr>

        10,00<\/p><\/td>

        0,617<\/p><\/td>

        75,00<\/p><\/td>

        34,680<\/p><\/td><\/tr>

        11,00<\/p><\/td>

        0,746<\/p><\/td>

        80,00<\/p><\/td>

        39,458<\/p><\/td><\/tr>

        12,00<\/p><\/td>

        0,888<\/p><\/td>

        100,00<\/p><\/td>

        61,700<\/p><\/td><\/tr>

        13,00<\/p><\/td>

        1,042<\/p><\/td>

        105,00<\/p><\/td>

        68,000<\/p><\/td><\/tr>

        14,00<\/p><\/td>

        1,208<\/p><\/td>

        110,00<\/p><\/td>

        74,600<\/p><\/td><\/tr>

        15,00<\/p><\/td>

        1,387<\/p><\/td>

        115,00<\/p><\/td>

        81,500<\/p><\/td><\/tr>

        16,00<\/p><\/td>

        1,578<\/p><\/td>

        120,00<\/p><\/td>

        88,800<\/p><\/td><\/tr>

        17,00<\/p><\/td>

        1,782<\/p><\/td>

        125,00<\/p><\/td>

        96,300<\/p><\/td><\/tr>

        18,00<\/p><\/td>

        1,988<\/p><\/td>

        130,00<\/p><\/td>

        104,000<\/p><\/td><\/tr>

        19,00<\/p><\/td>

        2,226<\/p><\/td>

        135,00<\/p><\/td>

        112,000<\/p><\/td><\/tr>

        20,00<\/p><\/td>

        2,466<\/p><\/td>

        140,00<\/p><\/td>

        121,000<\/p><\/td><\/tr>

        21,00<\/p><\/td>

        2,719<\/p><\/td>

        145,00<\/p><\/td>

        130,000<\/p><\/td><\/tr>

        22,00<\/p><\/td>

        2,984<\/p><\/td>

        150,00<\/p><\/td>

        139,000<\/p><\/td><\/tr>

        23,00<\/p><\/td>

        3,261<\/p><\/td>

        160,00<\/p><\/td>

        158,000<\/p><\/td><\/tr>

        24,00<\/p><\/td>

        3,551<\/p><\/td>

        170,00<\/p><\/td>

        178,000<\/p><\/td><\/tr>

        25,00<\/p><\/td>

        3,853<\/p><\/td>

        180,00<\/p><\/td>

        200,000<\/p><\/td><\/tr>

        26,00<\/p><\/td>

        4,163<\/p><\/td>

        190,00<\/p><\/td>

        223,000<\/p><\/td><\/tr>

        27,00<\/p><\/td>

        4,495<\/p><\/td>

        200,00<\/p><\/td>

        247,000<\/p><\/td><\/tr>

        28,00<\/p><\/td>

        4,834<\/p><\/td>

        \u00a0<\/p><\/td>

        \u00a0<\/p><\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

        \u0130n\u015faat demirleri Yuvarlak D\u00fcz \u0130n\u015faat Demirleri Mil \u015feklinde de isimlendirilen yuvarlak d\u00fcz in\u015faat demirleri, s\u0131cak haddeleme tekni\u011fiyle imal edilerek sat\u0131\u015fa takdim edilir. S\u0131cak haddeleme prosed\u00fcr\u00fcn\u00fcn sonras\u0131nda so\u011fuk kal\u0131plardan \u00e7ekilerek \u00e7ubuk hale getirilir. Bu sayede dayan\u0131kl\u0131 ve uzun \u00f6m\u00fcrl\u00fc halini kazan\u0131r. Dayan\u0131kl\u0131 kimyasal yap\u0131lar\u0131, korozyon direnci ve d\u00fcz bir y\u00fczeye sahip olmas\u0131 in\u015faat ve sanayi alanlar\u0131nda […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-3783","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3783","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/comments?post=3783"}],"version-history":[{"count":4,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3783\/revisions"}],"predecessor-version":[{"id":3787,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3783\/revisions\/3787"}],"wp:attachment":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/media?parent=3783"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}