{"id":3433,"date":"2023-02-09T10:26:30","date_gmt":"2023-02-09T07:26:30","guid":{"rendered":"https:\/\/torosdemir.com\/?page_id=3433"},"modified":"2025-10-20T11:26:04","modified_gmt":"2025-10-20T08:26:04","slug":"aluminium-sheet","status":"publish","type":"page","link":"https:\/\/torosdemir.com\/en_gb\/aluminium-sheet\/","title":{"rendered":"Aluminium Sheet"},"content":{"rendered":"
\n\t\t\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Hair<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Aluminium Sheet<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Aluminium sheet is the name of the products obtained from aluminium using rolling technique. The name of the sheets, which are one of the most important products of the metal sector, is different according to whether they are thin and thick. In this context, thin sheets are called sheet metal, while thick sheets are called plates. Aluminium sheets are as resistant to atmospheric corrosion as possible. With the help of these features, it is as simple as possible to take shape.<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Quality : 1050 - 2007 - 2011 - 2014 - 2017A - 2024 - 3003 - 5005 - 5052 - 5083 - 5086 - 5754 - 6013 - 6060 - 6061 - 6063 - 6082 - 7020 - 7075<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Width : 100 - 200 cm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Wall Thickness : 0,30 - 10,00 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Aluminium<\/strong>The electricity and heat factor arising from the basic feature of flour is similarly seen in the sheets. It can be mentioned that these sheets, which are very talented in terms of functionality, are also of high quality in visual terms. Therefore, in decorative coatings\u00a0Aluminium sheet<\/strong>They are used in different areas. Although it is the most suitable product for welding, it has low mechanical properties.<\/p>

Aluminium<\/strong>\u00a0Using the plates in the wrong areas causes wear of the machine parts.\u00a0Aluminium<\/strong>\u00a0Ideal according to the conditions to which it will be exposed when buying sheet or plate\u00a0Aluminium<\/strong>\u00a0alloy is necessary to decide.<\/p>

Aluminium<\/strong>, is a light, silvery, corrosion-resistant metal with excellent machinability - the most common (most known) element after oxygen and silicon.<\/p>

Aluminium<\/strong>\u00a0is found in nature only as a compound. The basic substance for the production of this metal is bauxite (Aluminium<\/strong>\u00a0ta\u015f\u0131)ki bu kire\u00e7 ta\u015f\u0131n\u0131n ve silikat kayalar\u0131n\u0131n hava etkileriyle a\u015f\u0131nmas\u0131 sonucu olu\u015fan ve y\u00fcksek oranda (s\u0131k s\u0131k %50\u2019nin \u00fczerinde) A12O3 (Aluminium<\/strong>\u00a0bauxite) is a product containing.<\/p>

Pure Aluminium<\/strong>\u00a0is a material of low strength. Significantly higher strength properties - together with relatively high tensile strength (stretchability) and elasticity limits - can be achieved by adding reasonable alloying components.\u00a0Aluminium<\/strong>\u00a0alloy materials are classified as \u201cinherently hard\u201d and \u201cheat-treatable\u201d materials.<\/p>

But first, why don't you say\u00a0Aluminium<\/strong>\u201d should be addressed. Alternative products, in particular a range of steels such as P-20, H13 tool steel and stainless steel, as well as copper based alloys, often containing beryllium, are used in tool and mould programmes. These provide high strength and resistance to wear and tear, and in the case of copper alloys also thermal conductivity. However, no one material has all the properties required for a particular application; alternative materials are no exception, which are heavy, generally less machinable and, in the case of steel, have poor thermal conductivity.<\/p>

It has four times the thermal factor. This reduces the cooling cycle required in moulding procedures and minimises local hot spots that cause part distortion.\u00a0Aluminium<\/strong>\u00a0In addition, it allows the design of simpler cooling systems that require less design and machine processing.<\/p>

Lightweight.\u00a0Aluminium<\/strong>, has roughly one-third the density of steel. This facilitates the handling of tools and moulds; the lower inertia means that moulds can be opened and closed more quickly. In addition, the procedure with lighter weight tools results in less stress wear, which reduces maintenance and downtime. These benefits are particularly relevant for large tools and moulds.<\/p>

It can be machined and polished more quickly.\u00a0Aluminium<\/strong>\u00a0Depending on the nature of the alloy, it can be machined three to ten times faster than steel. This reduces the time required to produce large moulds, especially those with deep cavities.<\/p>

It shows a high electric factor. This, together with a lower melting point than steel, allows it to be used at a speed four to five times higher than steel.<\/p>

By means of these yards, a\u00a0Aluminium<\/strong>\u00a0in the mould programmes according to the manufacturer's calculations\u00a0Aluminium<\/strong>\u00a0kullanmak kal\u0131p \u00fcretiminde \u00e7eli\u011fe oranla %30 oran\u0131nda maliyeti d\u00fc\u015f\u00fcrmektedir\u2014ki \u015fayet par\u00e7a \u00fcretim devre s\u00fcresi ve bundan dolay\u0131 artan verimlilik de hesaba kat\u0131l\u0131rsa bu rakam %40\u2019a \u00e7\u0131kar.<\/p>

One area where steel excels is surface hardness. In some programmes - ordinary (conventional<\/strong>) such as those enclosed in a plastic mould - \u201cBase\u201d\u00a0Aluminium<\/strong>\u00a0the surface has reasonable qualities. However, in cases where higher wear resistance is required, surface programmes such as hard anodising or nickel plating may result.\u00a0Aluminium<\/strong>\u00a0surface hardness levels approach those of steel.<\/p>

Because there are a number of different conditions in which tool and mould materials must operate, there are a number of different tools and mould materials available to meet these various needs.\u00a0Aluminium<\/strong>\u00a0designed combinations of alloy and menev procedure. Both cast and rolled products are available in a wide range of thicknesses, widths and lengths. Each product type has very special characteristics designed to suit the needs of the application.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Chemical and Mechanical Properties<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Mechanical Properties and Comparative Alloy Table<\/strong><\/p>

Alloy<\/strong><\/p><\/td>

\u00a0Alloy<\/strong><\/p><\/td>

\u00a0Etial<\/strong><\/p><\/td>

Tensile Strength<\/strong><\/p><\/td>

Yield Strength<\/strong><\/p><\/td>

\u00a0Elongation<\/strong><\/p><\/td>

Hardness<\/strong><\/p><\/td>

Density<\/strong><\/p><\/td><\/tr>

EN<\/strong><\/p><\/td>

DIN<\/strong><\/p><\/td>

( Mpa )<\/strong><\/p><\/td>

( % )<\/strong><\/p><\/td>

( Min-% )<\/strong><\/p><\/td>

( HB )<\/strong><\/p><\/td>

( g\/cm3 )<\/strong><\/p><\/td><\/tr>

\u00a01050<\/p><\/td>

\u00a0Al 99.5<\/p><\/td>

Etial-5<\/p><\/td>

\u00a0105-145<\/p><\/td>

\u00a085<\/p><\/td>

\u00a04<\/p><\/td>

\u00a034<\/p><\/td>

\u00a02,71<\/p><\/td><\/tr>

3003<\/p><\/td>

AlMnCu<\/p><\/td>

Etial-0<\/p><\/td>

145-185<\/p><\/td>

115<\/p><\/td>

5<\/p><\/td>

45<\/p><\/td>

2,71<\/p><\/td><\/tr>

3105<\/p><\/td>

AlMn0.5Mg0.5<\/p><\/td>

Etial-1<\/p><\/td>

150-200<\/p><\/td>

120<\/p><\/td>

5<\/p><\/td>

47<\/p><\/td>

2,71<\/p><\/td><\/tr>

5005<\/p><\/td>

AlMg1<\/p><\/td>

Etial-30<\/p><\/td>

125-165<\/p><\/td>

80<\/p><\/td>

5<\/p><\/td>

\u00a047<\/p><\/td>

2,71<\/p><\/td><\/tr>

5052<\/p><\/td>

AlMg2,5<\/p><\/td>

Etial-35<\/p><\/td>

210-260<\/p><\/td>

130<\/p><\/td>

7<\/p><\/td>

61<\/p><\/td>

2,71<\/p><\/td><\/tr>

\u00a05754<\/p><\/td>

AlMg3<\/p><\/td>

Etial-50<\/p><\/td>

210<\/p><\/td>

80<\/p><\/td>

17<\/p><\/td>

52<\/p><\/td>

2,72<\/p><\/td><\/tr>

5083<\/p><\/td>

AlMg4,5Mn<\/p><\/td>

Etial-52<\/p><\/td>

275<\/p><\/td>

125<\/p><\/td>

15<\/p><\/td>

75<\/p><\/td>

2,73<\/p><\/td><\/tr>

6061<\/p><\/td>

AlMgSiCu<\/p><\/td>

Etial-53<\/p><\/td>

343<\/p><\/td>

318<\/p><\/td>

11<\/p><\/td>

95<\/p><\/td>

2,7<\/p><\/td><\/tr>

6082<\/p><\/td>

AlMgSi1<\/p><\/td>

Etial-60<\/p><\/td>

358<\/p><\/td>

310<\/p><\/td>

10<\/p><\/td>

95<\/p><\/td>

2,7<\/p><\/td><\/tr>

7075<\/p><\/td>

AlZnMgCu1,5<\/p><\/td>

Etial-65<\/p><\/td>

533<\/p><\/td>

462<\/p><\/td>

8,5<\/p><\/td>

150<\/p><\/td>

2,8<\/p><\/td><\/tr>

8011<\/p><\/td>

AlFeSi<\/p><\/td>

Etial-62<\/p><\/td>

105-145<\/p><\/td>

90<\/p><\/td>

6<\/p><\/td>

35<\/p><\/td>

2,71<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Aluminium Process Alloys Comparison Table<\/strong><\/p>

EN<\/strong><\/p><\/td>

TSE<\/strong><\/p><\/td>

Germany<\/strong><\/p><\/td>

Etial<\/strong><\/p><\/td>

France<\/strong><\/p><\/td>

United Kingdom<\/strong><\/p><\/td>

Italy<\/strong><\/p><\/td>

ISO<\/strong><\/p><\/td><\/tr>

(DIN)<\/strong><\/p><\/td>

(NF)<\/strong><\/p><\/td>

(BS)<\/strong><\/p><\/td>

(UNI)<\/strong><\/p><\/td><\/tr>

2011<\/p><\/td>

AlCuBiPb<\/p><\/td>

AlCuBiPb<\/p><\/td>

Etial-20<\/p><\/td>

A-U5PbBi<\/p><\/td>

FCI<\/p><\/td>

P-AlCu5,5Pb<\/p><\/td>

Alcu6BiPb<\/p><\/td><\/tr>

2014<\/p><\/td>

AICuSiMn<\/p><\/td>

AICuSiMn<\/p><\/td>

Etial-21<\/p><\/td>

A-U4 SG<\/p><\/td>

H15<\/p><\/td>

P-AlCu4,SiMnMg<\/p><\/td>

AICu4SiMg<\/p><\/td><\/tr>

2017<\/p><\/td>

AlCuSiMg1<\/p><\/td>

AlCuMg1<\/p><\/td>

Etial-22<\/p><\/td>

A-U4 G<\/p><\/td>

\u00a0\u2013<\/p><\/td>

P-AICu4MgMn<\/p><\/td>

AlCu4MgSi<\/p><\/td><\/tr>

2024<\/p><\/td>

AlCuMg2<\/p><\/td>

AICuMg2<\/p><\/td>

Etial-24<\/p><\/td>

A-U4G1<\/p><\/td>

L97<\/p><\/td>

P-AICu4,5MgMn<\/p><\/td>

AlCu4Mg1<\/p><\/td><\/tr>

3003<\/p><\/td>

AlMnCu<\/p><\/td>

AIMnCu<\/p><\/td>

Etial-30<\/p><\/td>

A-MI<\/p><\/td>

\u00a0\u2013<\/p><\/td>

P-AIM1 ,2Cu<\/p><\/td>

AlMn1Cu<\/p><\/td><\/tr>

3004<\/p><\/td>

AlMn1Mg1<\/p><\/td>

AlMn1Mg1<\/p><\/td>

Etial-31<\/p><\/td>

A-MIG<\/p><\/td>

\u2013<\/p><\/td>

P-AlMn1,2Mg<\/p><\/td>

AlMn1Mg1<\/p><\/td><\/tr>

3103<\/p><\/td>

AlMn1<\/p><\/td>

AIMn<\/p><\/td>

Etial-33<\/p><\/td>

M<\/p><\/td>

N3<\/p><\/td>

3568<\/p><\/td>

AlMn1<\/p><\/td><\/tr>

3105<\/p><\/td>

AlMn0.5Mg0.5<\/p><\/td>

AlMn0.5Mg0.5<\/p><\/td>

Etial-35<\/p><\/td>

\u00a0\u2013<\/p><\/td>

N31<\/p><\/td>

\u00a0\u2013<\/p><\/td>

AlMn0.5Mg0.5<\/p><\/td><\/tr>

7075<\/p><\/td>

AlZnMgCu1,5<\/p><\/td>

AlZnMgCu1 ,5<\/p><\/td>

Etial-44<\/p><\/td>

A-Z5Gu<\/p><\/td>

DDT5074A<\/p><\/td>

P-AIZn5,5MgCu<\/p><\/td>

AIZn5,5MgCu<\/p><\/td><\/tr>

5005<\/p><\/td>

AlMg0,8<\/p><\/td>

AlMg1<\/p><\/td>

Etial-50<\/p><\/td>

A-Go,6<\/p><\/td>

N41<\/p><\/td>

P-AIMg0.8<\/p><\/td>

AlMg1<\/p><\/td><\/tr>

5050<\/p><\/td>

AlMg1 ,5<\/p><\/td>

\u00a0<\/p><\/td>

Etial-51<\/p><\/td>

A-G1.5<\/p><\/td>

\u2013<\/p><\/td>

P-AIMg1.5<\/p><\/td>

AlMg1 ,5<\/p><\/td><\/tr>

5052<\/p><\/td>

AlMg2,5<\/p><\/td>

AlMg2,5Cr<\/p><\/td>

Etial-52<\/p><\/td>

A-G2,5C<\/p><\/td>

N4<\/p><\/td>

P-AIMg2.5<\/p><\/td>

AIMg2.5<\/p><\/td><\/tr>

5754<\/p><\/td>

AlMg3<\/p><\/td>

AlMg3<\/p><\/td>

Etial-53<\/p><\/td>

A-G3<\/p><\/td>

N5<\/p><\/td>

P-AIMg3.5<\/p><\/td>

AIMg3<\/p><\/td><\/tr>

5251<\/p><\/td>

AlMg2Mn0,3<\/p><\/td>

AlMg2Mn<\/p><\/td>

Etial-54<\/p><\/td>

A-G2m<\/p><\/td>

L80<\/p><\/td>

P-AIMg2Mn<\/p><\/td>

AIMg2<\/p><\/td><\/tr>

6063<\/p><\/td>

AlMgSi0.5<\/p><\/td>

AlMgS10.5<\/p><\/td>

Etial-60<\/p><\/td>

A-GS<\/p><\/td>

H9<\/p><\/td>

\u00a0\u2013<\/p><\/td>

AlMg0,7Si<\/p><\/td><\/tr>

6351<\/p><\/td>

AlMgSi1<\/p><\/td>

AlMgSi1<\/p><\/td>

Etial-61<\/p><\/td>

A-SGM<\/p><\/td>

H30<\/p><\/td>

P-AlSilMgMn<\/p><\/td>

AlSiMg0.5Mn<\/p><\/td><\/tr>

6082<\/p><\/td>

AIMS11<\/p><\/td>

AlMgSi1<\/p><\/td>

Etial-62<\/p><\/td>

A-SGM0.7<\/p><\/td>

H-30<\/p><\/td>

P-AlSi1MgMn<\/p><\/td>

Al Si Mg Mn<\/p><\/td><\/tr>

6463<\/p><\/td>

\u00a0\u2013<\/p><\/td>

E-AIMgSi<\/p><\/td>

Etial-64<\/p><\/td>

A-GS\/L<\/p><\/td>

91-E<\/p><\/td>

P-AlSi0,5Mg<\/p><\/td>

\u2013<\/p><\/td><\/tr>

6061<\/p><\/td>

AIMgISiCu<\/p><\/td>

AlMg1SiCu<\/p><\/td>

Etial-65<\/p><\/td>

6061<\/p><\/td>

H-20<\/p><\/td>

P-AIMgISiCu<\/p><\/td>

AlMg1SiCu<\/p><\/td><\/tr>

8011<\/p><\/td>

AIFeSi<\/p><\/td>

AlFeSi<\/p><\/td>

Etial-98<\/p><\/td>

\u00a0\u2013<\/p><\/td>

\u00a0\u2013<\/p><\/td>

\u00a0\u2013<\/p><\/td>

\u2013<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Chemical Properties<\/strong><\/p>

Alloy<\/strong><\/p><\/td>

Mg<\/strong><\/p><\/td>

Mn<\/strong><\/p><\/td>

Fe<\/strong><\/p><\/td>

Si<\/strong><\/p><\/td>

Cu<\/strong><\/p><\/td>

Zn<\/strong><\/p><\/td>

Cr<\/strong><\/p><\/td>

Ti<\/strong><\/p><\/td>

Zr<\/strong><\/p><\/td>

Other<\/strong><\/p><\/td><\/tr>

1050<\/p><\/td>

<0.05<\/p><\/td>

<0.05<\/p><\/td>

\u00a0<0.40<\/p><\/td>

<0.25<\/p><\/td>

<0.05<\/p><\/td>

<0.07<\/p><\/td>

\u00a0<\/p><\/td>

<0.05<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td><\/tr>

2014<\/p><\/td>

0.20-0.8<\/p><\/td>

\u00a00.40-1.2<\/p><\/td>

<0.7<\/p><\/td>

\u00a00.50-1.2<\/p><\/td>

3.9-5.0<\/p><\/td>

\u00a0<0.25<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<0.15<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

3003<\/p><\/td>

\u00a0<\/p><\/td>

1.0-1.15<\/p><\/td>

\u00a0<0.7<\/p><\/td>

\u00a0<0.6<\/p><\/td>

0.05-0.20<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

3005<\/p><\/td>

\u00a00.20-0.6<\/p><\/td>

\u00a01.0-1.15<\/p><\/td>

\u00a0<0.7<\/p><\/td>

\u00a0<0.6<\/p><\/td>

<0.30<\/p><\/td>

<0.25<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

3105<\/p><\/td>

\u00a00.20-0.8<\/p><\/td>

0.30-0.8<\/p><\/td>

\u00a0<0.7<\/p><\/td>

\u00a0<0.6<\/p><\/td>

<0.30<\/p><\/td>

<0.40<\/p><\/td>

<0.20<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

5005<\/p><\/td>

\u00a00.50-1.1<\/p><\/td>

<0.20<\/p><\/td>

\u00a0<0.7<\/p><\/td>

\u00a0<0.30<\/p><\/td>

\u00a0<0.20<\/p><\/td>

<0.25<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

5049<\/p><\/td>

1.6-2.5<\/p><\/td>

0.5-1.1<\/p><\/td>

<0.50<\/p><\/td>

\u00a0<0.40<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.20<\/p><\/td>

<0.30<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

5052<\/p><\/td>

2.2-2.8<\/p><\/td>

<0.10<\/p><\/td>

<0.40<\/p><\/td>

\u00a0<0.25<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.10<\/p><\/td>

0.15-0.35<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

5083<\/p><\/td>

4.0-4.9<\/p><\/td>

0.40-1.0<\/p><\/td>

\u00a0<0.40<\/p><\/td>

<0.40<\/p><\/td>

\u00a0<0.10<\/p><\/td>

<0.25<\/p><\/td>

0.05-0.25<\/p><\/td>

\u00a0<0.15<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

5086<\/p><\/td>

3.5-4.5<\/p><\/td>

0.20-0.7<\/p><\/td>

\u00a0<0.50<\/p><\/td>

<0.40<\/p><\/td>

\u00a0<0.10<\/p><\/td>

<0.25<\/p><\/td>

0.05-0.25<\/p><\/td>

\u00a0<0.15<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

5182<\/p><\/td>

\u00a04.0-5.0<\/p><\/td>

0.20-0.50<\/p><\/td>

\u00a0<0.35<\/p><\/td>

\u00a0<0.20<\/p><\/td>

\u00a0<\/p><\/td>

<0.25<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

5754<\/p><\/td>

2.6-3.6<\/p><\/td>

\u00a0<0.50<\/p><\/td>

<0.40<\/p><\/td>

<0.40<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.20<\/p><\/td>

<0.30<\/p><\/td>

\u00a0<0.15<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

6060<\/p><\/td>

0.35-0.6<\/p><\/td>

<0.10<\/p><\/td>

0.10-0.30<\/p><\/td>

0.30-0.6<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.15<\/p><\/td>

<0.05<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr>

6061<\/p><\/td>

0.8-1.2<\/p><\/td>

\u00a0<0.15<\/p><\/td>

<0.07<\/p><\/td>

\u00a00.40-0.8<\/p><\/td>

\u00a00.15-0.40<\/p><\/td>

<0.25<\/p><\/td>

0.04-0.35<\/p><\/td>

<0.15<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

6063<\/p><\/td>

0.45-0.9<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.35<\/p><\/td>

\u00a00.20-0.6<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<0.10<\/p><\/td>

<0.10<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<\/p><\/td>

<0.15<\/p><\/td><\/tr>

6082<\/p><\/td>

0.6-1.2<\/p><\/td>

\u00a00.40-1.0<\/p><\/td>

<0.50<\/p><\/td>

0.7-1.3<\/p><\/td>

\u00a0<0.10<\/p><\/td>

\u00a0<0.20<\/p><\/td>

<0.25<\/p><\/td>

\u00a0<0.10<\/p><\/td>

0.04-0.35<\/p><\/td>

<0.15<\/p><\/td><\/tr>

7075<\/p><\/td>

\u00a02.1 -2.9<\/p><\/td>

<0.30<\/p><\/td>

\u00a0<0.50<\/p><\/td>

\u00a0<0.40<\/p><\/td>

\u00a01.2-2.0<\/p><\/td>

5.1 -6.1<\/p><\/td>

0.18-0.28<\/p><\/td>

\u00a0<0.20<\/p><\/td>

<0.15<\/p><\/td>

\u00a0<0.15<\/p><\/td><\/tr><\/tbody><\/table><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Technical Specifications<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Relative Density<\/h4>

Alloy components\u00a0according to 2.7 to 2.9 g\/cm3<\/strong>\u00a0between the weight of the steel. This is only 1\/3 of the weight of the steel.<\/p>

Corrosion Resistance<\/h4>

Aluminium<\/strong>, When it comes into contact with air, it forms a natural surface protective layer. If this layer is removed, it forms again and thus shows a remarkable resistance to atmospheric corrosion. Pure and very pure\u00a0Aluminium<\/strong>, In addition, copper-free alloys are resistant to a wide range of media. For this reason, these products are widely used in the construction and chemical industries, the food and beverage industry and the automotive industry. However, with very high strength grades - over 500 N\/mm2Aluminium<\/strong>\u00a0based materials have limited resistance. This must be compensated by structural design solutions.<\/p>

Cold and Hot Forming Properties<\/h4>

Aluminium<\/strong>\u00a0offers a relatively high distortion (deformation) resistance property. However, in view of the use of reasonable method installations,\u00a0Aluminium<\/strong>\u00a0and\u00a0Aluminium<\/strong>\u00a0alloys exhibit good to very good cold or hot forming properties in a wide range of processes (rolling, extrusion, forging, casting).<\/p>

Good Conductor of Electricity and Heat<\/h4>

Aluminium<\/strong>\u00a0has a high electrical conductivity (pure\u00a0Aluminium<\/strong>\u00a0from 38 to more or less 34 m\/Ohm mm2). The materials used for electrical conductors are basically pure\u00a0Aluminium<\/strong>\u00a0and E-AlMgSi materials. The level of thermal conductivity is roughly four times higher than that of iron, roughly 80-230 W\/m o K.<\/p>

Magnetic properties<\/h4>

Aluminium<\/strong>\u00a0is non-magnetic - an important feature in electrical engineering, electronics and mechanical engineering.<\/p>

Surface Treatment<\/h4>

Aluminium<\/strong>\u00a0a range of surface treatments are available, which give more or less perfect harmonic capability to many programmes.<\/p>

Anodisation<\/strong><\/p>

Decorative surfaces<\/p>

Wide range of colours<\/p>

Surfaces for technical plant \/ factory (plant) and vehicles<\/p>

Wear-resistant<\/p>

Powder coating in many colour shades<\/p>

Wet-spray painting in many shades of colour<\/p>

Polishing<\/p>

Mechanical and chemical<\/p>

Grinding and brushing, etc.<\/p>

High reflectivity<\/p>

Aluminium<\/strong>\u00a0Surfaces are naturally good reflectors of light and heat. A range of surface treatments can be applied to vary the reflection and absorption qualities over a wide range of values.<\/p>

Merging Methods<\/h1>

Almost all normal joining methods\u00a0Aluminium<\/strong>\u00a0and its alloys.<\/p>

No health risk<\/p>

According to current medical knowledge,\u00a0Aluminium<\/strong>\u00a0no health risks<\/p>

Possibility of recycling<\/p>

As used in industry, the term \u201crecycling\u201d refers in particular to the use of scrap and used finished products as secondary raw materials in the production of new products. All in use\u00a0Aluminium<\/strong>\u00a0Approximately 1\/3 of the raw materials are produced with reasonable recycling procedures, without any loss of quality.<\/p>

For the recycling procedure (process), primary\u00a0Aluminium<\/strong>\u00a0only %5 of the energy required for its production is required. When a choice has to be made between most possible materials,\u00a0Aluminium<\/strong>\u00a0It will be the most peaceful and economical choice with nature.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Weight Ruler<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

THICKNESS\u00a0<\/strong><\/p><\/td>

\u00a0m2<\/strong><\/p><\/td>

\u00a0THICKNESS<\/strong><\/p><\/td>

\u00a0m2<\/strong><\/p><\/td><\/tr>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td>

\u00a0<\/p><\/td><\/tr>

mm<\/strong><\/p><\/td>

Weight<\/strong><\/p><\/td>

mm<\/strong><\/p><\/td>

Weight<\/strong><\/p><\/td><\/tr>

\u00a00,40<\/p><\/td>

\u00a03,140<\/p><\/td>

6,00\u00a0<\/p><\/td>

47,100\u00a0<\/p><\/td><\/tr>

\u00a00,50<\/p><\/td>

\u00a03,925<\/p><\/td>

7,00\u00a0<\/p><\/td>

54,950\u00a0<\/p><\/td><\/tr>

\u00a00,60<\/p><\/td>

4,710\u00a0<\/p><\/td>

8,00\u00a0<\/p><\/td>

62,800\u00a0<\/p><\/td><\/tr>

\u00a00,70<\/p><\/td>

\u00a05,495<\/p><\/td>

9,00\u00a0<\/p><\/td>

70,650\u00a0<\/p><\/td><\/tr>

\u00a00,80<\/p><\/td>

\u00a06,280<\/p><\/td>

10,00\u00a0<\/p><\/td>

78,500\u00a0<\/p><\/td><\/tr>

\u00a00,90<\/p><\/td>

\u00a07,065<\/p><\/td>

12,00\u00a0<\/p><\/td>

94,200\u00a0<\/p><\/td><\/tr>

\u00a01,00<\/p><\/td>

\u00a07,850<\/p><\/td>

15,00\u00a0<\/p><\/td>

117,750\u00a0<\/p><\/td><\/tr>

\u00a01,20<\/p><\/td>

\u00a09,420<\/p><\/td>

20,00\u00a0<\/p><\/td>

157,000\u00a0<\/p><\/td><\/tr>

\u00a01,50<\/p><\/td>

\u00a011,775<\/p><\/td>

25,00\u00a0<\/p><\/td>

196,250\u00a0<\/p><\/td><\/tr>

\u00a02,00<\/p><\/td>

\u00a015,700<\/p><\/td>

30,00\u00a0<\/p><\/td>

235,500\u00a0<\/p><\/td><\/tr>

\u00a02,50<\/p><\/td>

\u00a019,625<\/p><\/td>

35,00\u00a0<\/p><\/td>

274,750\u00a0<\/p><\/td><\/tr>

\u00a03,00<\/p><\/td>

\u00a023,550<\/p><\/td>

40,00\u00a0<\/p><\/td>

314,000\u00a0<\/p><\/td><\/tr>

\u00a04,00<\/p><\/td>

\u00a031,400<\/p><\/td>

50,00\u00a0<\/p><\/td>

392,500\u00a0<\/p><\/td><\/tr>

\u00a05,00<\/p><\/td>

\u00a039,250<\/p><\/td>

80,00\u00a0<\/p><\/td>

628,000\u00a0<\/p><\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

saclar Al\u00fcminyum Sac Al\u00fcminyum sac, haddeleme tekni\u011fi kullan\u0131larak Al\u00fcminyumdan elde edilen \u00fcr\u00fcnlere ad\u0131 verilir. Metal sekt\u00f6r\u00fcn\u00fcn en \u00f6nemli \u00fcr\u00fcnlerinden biri olan saclar\u0131n ince ve kal\u0131n olmas\u0131na g\u00f6re ismi farkl\u0131d\u0131r. Bu ba\u011flamda ince saclara sac denirken kal\u0131n saclara da plaka ad\u0131 verilmektedir. Al\u00fcminyum saclar, atmosferik korozyona kar\u015f\u0131 olabildi\u011fince dayan\u0131kl\u0131d\u0131r. Bu \u00f6zellikleri yard\u0131m\u0131yla de bi\u00e7im almas\u0131 olabildi\u011fince […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-3433","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3433","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/comments?post=3433"}],"version-history":[{"count":7,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3433\/revisions"}],"predecessor-version":[{"id":3441,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3433\/revisions\/3441"}],"wp:attachment":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/media?parent=3433"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}