{"id":3404,"date":"2023-02-09T10:09:41","date_gmt":"2023-02-09T07:09:41","guid":{"rendered":"https:\/\/torosdemir.com\/?page_id=3404"},"modified":"2025-10-20T14:24:29","modified_gmt":"2025-10-20T11:24:29","slug":"enlarged-sheet","status":"publish","type":"page","link":"https:\/\/torosdemir.com\/en_gb\/enlarged-sheet\/","title":{"rendered":"Expanded Sheet Metal"},"content":{"rendered":"
\n\t\t\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Hair<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Expanded Sheet Metal<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Expanded sheet metal has many different areas of use. It is also advantageous in terms of physical and cost. Expanded sheet metal, which is supplied in one piece and has a very light structure, is also known for its use in most areas. The product, which is also manufactured by being expressed as stretched or expanded sheet metal, offers light, air and liquid permeability.<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Euro Quality : S235JR - S235JR(Cu) - S235JRC<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Erdemir Quality : 3137 - 3237 - 3281 - 3337 - 3937 - 4237 - 4437 - 5437<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Size : 1000x2000 - 1250x2500 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Wall Thickness : 2,00 - 3,00 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Eye Spacing : 55x22 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Expanded sheet metal, whose dimensions can be determined specifically for the spaces, is prepared and manufactured according to standard dimensions compatible with standard pan suspensions. In addition to the standard production feature, the procedure can also be made according to the customer's request in product production.<\/p>

Expanded sheet metal programmes, which will give the project to be carried out a contemporary and very modern atmosphere, also offer many advantages. Considering the advantages, ease of use and usage effects, expanded metal prices appear as a very economical choice.<\/p>

Stainless steel aluminium materials are used in the manufacture of the product, which is presented as a kind of metal sheet.<\/p>

Chemical Composition (%)<\/p><\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p><\/td>

C<\/p><\/td>

Mn<\/p><\/td>

P max.<\/p><\/td>

S max.<\/p><\/td>

Si max.<\/p><\/td>

Cu max.<\/p><\/td>

N4<\/p><\/td>

CE(IIW)(6)\u00a0<\/sup>max. (%)<\/p><\/td><\/tr>

Standard<\/p><\/td>

Quality<\/p><\/td>

Quality No<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td>

max.<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S235JR+AR Special<\/p><\/td>

3235(2)<\/p><\/td>

0,17<\/p><\/td>

1,4<\/p><\/td>

0.035<\/p><\/td>

0.035<\/p><\/td>

0,4<\/p><\/td>

0,55<\/p><\/td>

0.012<\/p><\/td>

0,35<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S275JR+AR Special CTB<\/p><\/td>

3243(3(7(9<\/p><\/td>

0.14-0.20<\/p><\/td>

1.00 - 1.35<\/p><\/td>

0.025<\/p><\/td>

0.025<\/p><\/td>

0.15 - 0.25<\/p><\/td>

0,55<\/p><\/td>

0.012<\/p><\/td>

0,4<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S235JR+AR CTA<\/p><\/td>

4275811<\/sup>)<\/p><\/td>

0,17<\/p><\/td>

1,2<\/p><\/td>

0.025<\/p><\/td>

0.035<\/p><\/td>

0,03<\/p><\/td>

0,55<\/p><\/td>

0.012<\/p><\/td>

0,35<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S235J2S235J2+N CTA<\/p><\/td>

4239(5(8)<\/p><\/td>

0,17<\/p><\/td>

1,4<\/p><\/td>

0.025<\/p><\/td>

0.025<\/p><\/td>

0,03<\/p><\/td>

0,55<\/p><\/td>

\u00a0<\/p><\/td>

0,35<\/p><\/td><\/tr>

EN 10025-2<\/p><\/td>

S275J2<\/p><\/td>

4246(5)7<\/p><\/td>

0,18<\/p><\/td>

1,5<\/p><\/td>

0.025<\/p><\/td>

0.025<\/p><\/td>

-<\/p><\/td>

0,55<\/p><\/td>

\u00a0<\/p><\/td>

0,4<\/p><\/td><\/tr><\/tbody><\/table><\/div>

\u00a0<\/p>

Explanations<\/strong><\/p>

1) The quality specified in this table is produced at \u0130sdemir facilities within the framework of agreements with customers.<\/p>

2) In this quality, it is produced in such a way that no roll fracture occurs.<\/p>

3) Mechanical testing is not performed according to production practices.<\/p>

4) In the chemical composition of steel min. % 0.020 Al in the chemical composition of steel, the upper limit value of N is not applied.<\/p>

5) These grades are produced in full still and have a minimum Al\/N ratio of 2:1.<\/p>

6) The carbon equivalent is calculated according to the formula CEV (IIW) % = C + Mn \/ 6 + (Cr + Mo + V) \/ 5 + (Ni + Cu) \/ 15.<\/p>

7) For S275 and S355 grades, max. carbon equivalent (CEV) is increased by % 0.02 for %Si \u2264 0.04 and % 0.01 for %Si \u2264 0.25.<\/p>

8) Suitable for galvanised coating as \u201cCategory A\u201d. In Category A class, Si \u2264 0.030% and Si+2.5P \u2264 0.090% limit is applied.<\/p>

9) Suitable for galvanised coating as \u201cCategory B\u201d. In Category B class, Si 0.14\u2264 Si \u22640.25% limit is applied.<\/p>

10) In line with production practices, the suitability for galvanised coating can be accepted subject to negotiation at the order stage. Classes suitable for galvanised coating Category A<\/p>

Si \u2264 0.030% and Si+2.5P \u2264 0.090% in Category B, Si 0.14\u2264 Si \u22640.25% in Category B, Si 0.25< Si \u22640.35% in Category D.<\/p>

11) Produced up to max. 8 mm thickness.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

What are the Characteristics<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n

- Expanded sheet metal<\/strong>of the\u00a0<\/strong>maintenance costs are low.<\/p>\n

- It has a clear field of vision.<\/p>\n

- There is no possibility of climbing as there is not enough space for hands and feet on the sheet.<\/p>\n

-\u00a0Expanded Sheet Metal<\/strong>They have long-lasting use.<\/p>\n

- Since there is no welding process, there is no possibility of rupture and breakage.<\/p>\n

- Resistant against impacts.<\/p>\n

- Since the square metre weight is light, it is economical in terms of cost and does not weigh much on the structure to be used.<\/p>\n

- Stacking, assembly and transport of the produced sheets are easy.<\/p>\n\n\n\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Hole Length - L<\/p>\n

Hole Width - B<\/p>\n

Slice Height - C<\/p>\n

Slice Thickness - S<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Areas of Use<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Extended<\/strong>\u00a0sheet<\/strong>\u00a0products have a very wide usage area. In many different areas from the production of small products to large building programmes\u00a0expanded sheets<\/strong>\u00a0Sometimes it is a material that provides superiority with its use, sometimes in decoration and sometimes as a preference other than this in production. The wide range of product usage areas can also be determined by the superiority features in product presentations. In addition, while having quality with a reasonable price, it also supports production with an economical choice.<\/p>

- heating and cooling systems<\/p>

- White goods sector<\/p>

- In Coal Quarries<\/p>

- On the walkways<\/p>

- Staircase structures<\/p>

- In the ship sector industry<\/p>

- Ceiling coatings<\/p>

- In lorry crates<\/p>

- In lift shafts<\/p>

- Shelf and cabinet programmes<\/p>

- In the automotive industry<\/p>

- In ventilation and wickets<\/p>

- Garden fences<\/p>

- In electrical and electronic systems<\/p>

- In seating groups<\/p>

- Furniture and decoration programmes<\/p>

- Sand and stone quarries<\/p>

- Flour and feed mills<\/p>

- On the boards<\/p>

- In rubbish bins<\/p>

- In transport systems<\/p>

- In dish antennas<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Weight Ruler<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

STANDARD
NO<\/p><\/td>

HOLE LENGTH<\/p><\/td>

HOLE
WIDTH<\/p><\/td>

DiLiM THICKNESS<\/p><\/td>

SAC
THICKNESS<\/p><\/td>

TOTAL THICKNESS<\/p><\/td>

WEIGHT<\/p><\/td><\/tr>

\u00a0<\/td>

Lmm<\/p><\/td>

Bmm
\u00b1%5<\/p><\/td>

Cmm
\u00b1 %5<\/p><\/td>

Smm
\u00b1 %5<\/p><\/td>

Amm<\/p><\/td>

Kg\/m2<\/p><\/td><\/tr>

2812 \/ 1515<\/p><\/td>

28<\/p><\/td>

12<\/p><\/td>

1,5<\/p><\/td>

1,5<\/p><\/td>

3,7<\/p><\/td>

3,0<\/p><\/td><\/tr>

2812 \/ 2010<\/p><\/td>

28<\/p><\/td>

12<\/p><\/td>

2,0<\/p><\/td>

1,0<\/p><\/td>

3,8<\/p><\/td>

2,7<\/p><\/td><\/tr>

2812 \/ 2510<\/p><\/td>

28<\/p><\/td>

12<\/p><\/td>

2,5<\/p><\/td>

1,0<\/p><\/td>

4,0<\/p><\/td>

3,0<\/p><\/td><\/tr>

2812 \/ 3020<\/p><\/td>

28<\/p><\/td>

12<\/p><\/td>

3,0<\/p><\/td>

2,0<\/p><\/td>

5,8<\/p><\/td>

7,1<\/p><\/td><\/tr>

3918 \/ 1510<\/p><\/td>

39<\/p><\/td>

18<\/p><\/td>

1,5<\/p><\/td>

1,0<\/p><\/td>

2,5<\/p><\/td>

2,0<\/p><\/td><\/tr>

3918 \/ 2015<\/p><\/td>

39<\/p><\/td>

18<\/p><\/td>

2,0<\/p><\/td>

1,5<\/p><\/td>

3,0<\/p><\/td>

2,4<\/p><\/td><\/tr>

3918 \/ 3030<\/p><\/td>

39<\/p><\/td>

18<\/p><\/td>

3,0<\/p><\/td>

3,0<\/p><\/td>

5,0<\/p><\/td>

7,9<\/p><\/td><\/tr>

5224 \/ 2020<\/p><\/td>

52<\/p><\/td>

24<\/p><\/td>

2,0<\/p><\/td>

2,0<\/p><\/td>

4,7<\/p><\/td>

2,5<\/p><\/td><\/tr>

5224 \/ 3030<\/p><\/td>

52<\/p><\/td>

24<\/p><\/td>

3,0<\/p><\/td>

3,0<\/p><\/td>

6,0<\/p><\/td>

6,1<\/p><\/td><\/tr>

5224 \/ 3515<\/p><\/td>

52<\/p><\/td>

24<\/p><\/td>

3,5<\/p><\/td>

1,5<\/p><\/td>

7,1<\/p><\/td>

3,3<\/p><\/td><\/tr>

5224 \/ 7050<\/p><\/td>

52<\/p><\/td>

24<\/p><\/td>

7,0<\/p><\/td>

5,0<\/p><\/td>

13,5<\/p><\/td>

22,9<\/p><\/td><\/tr>

6225 \/ 2510<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

2,5<\/p><\/td>

1,0<\/p><\/td>

4,8<\/p><\/td>

1,6<\/p><\/td><\/tr>

6225 \/ 2520<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

2,5<\/p><\/td>

2,0<\/p><\/td>

5,0<\/p><\/td>

3,1<\/p><\/td><\/tr>

6225 \/ 3030<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

3,0<\/p><\/td>

3,0<\/p><\/td>

6,4<\/p><\/td>

5,4<\/p><\/td><\/tr>

6225 \/ 4530<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

4,5<\/p><\/td>

3,0<\/p><\/td>

9,0<\/p><\/td>

9,3<\/p><\/td><\/tr>

6225 \/ 4040<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

4,0<\/p><\/td>

4,0<\/p><\/td>

8,0<\/p><\/td>

9,5<\/p><\/td><\/tr>

6225 \/ 9040<\/p><\/td>

62<\/p><\/td>

25<\/p><\/td>

9,0<\/p><\/td>

4,0<\/p><\/td>

14,0<\/p><\/td>

20,0<\/p><\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

saclar Geni\u015fletilmi\u015f Sac Geni\u015fleti\u015fmi\u015f sac\u0131n bir\u00e7ok farkl\u0131 kullan\u0131m alan\u0131 vard\u0131r. Ayr\u0131ca fiziksel ve maliyet a\u00e7\u0131s\u0131ndan da avantajl\u0131d\u0131r. Tek par\u00e7al\u0131 ve de olduk\u00e7a hafif bir yap\u0131ya sahip olarak tedari\u011fi yap\u0131lan geni\u015fletilmi\u015f sac \u00e7o\u011fu alanda kullan\u0131labilmesi ile de bilinir. Gerdirilmi\u015f veya geni\u015fletilmi\u015f sac \u015feklinde de ifade edilerek imal edilmekte olan \u00fcr\u00fcn \u0131\u015f\u0131k, hava ve s\u0131v\u0131 ge\u00e7irgenlik \u00f6zelli\u011fini […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-3404","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3404","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/comments?post=3404"}],"version-history":[{"count":16,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3404\/revisions"}],"predecessor-version":[{"id":3429,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3404\/revisions\/3429"}],"wp:attachment":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/media?parent=3404"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}