{"id":3329,"date":"2023-02-09T09:23:48","date_gmt":"2023-02-09T06:23:48","guid":{"rendered":"https:\/\/torosdemir.com\/?page_id=3329"},"modified":"2025-10-20T14:18:40","modified_gmt":"2025-10-20T11:18:40","slug":"galvanised-sheet","status":"publish","type":"page","link":"https:\/\/torosdemir.com\/en_gb\/galvanised-sheet\/","title":{"rendered":"Galvanised Steel Sheet"},"content":{"rendered":"
\n\t\t\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Hair<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Cold Rolled Steel Sheet<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Zinc plating of CR produces galvanised sheet and tin plating produces tinplate. After the CR has been produced or the galvanising procedure has been carried out, it is necessary to cut the sheet in accordance with the request.\n\nCharacteristics of Galvanised Steel Sheet It is long lasting, the zinc coating does not fall off when folded, it is suitable for deep drawing and plastering, it holds solder easily, it can be painted very simply, it is resistant to fire, it is economical, easy and resistant to many external factors.<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Euro Quality : DX51D+Z - DX52D+Z - DX53D+Z - DX54D+Z - DX56D+Z(1)(3) - DX57D+Z(3)<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Erdemir Quality : 1311 - 1312 - 1313 - 1314 - 1315 - 1317 - 1322 - 1325 - 1328 - 1332 - 1335<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Standards : EN 10346<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Width : 500 - 1250 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
<\/i><\/div><\/div>

Wall Thickness : 0,30 -3,00 mm<\/h3><\/div> <\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

What are the Features of Galvanised Steel Sheet?<\/h1>

Among the factors that cause the most damage to iron and iron products are moisture and ground. The life of iron and iron products exposed to moisture and wetness is shortened and loses its properties and resistance within a few years. This causes iron and iron products to lose their functions. For this reason, the sheet is dressed\u00a0galvanised<\/a>\u00a0through\u00a0galvanised sheet<\/strong>\u00a0It increases the resistance of the products and ensures long life in its complete fulfilment of its function.\u00a0Galvanised sheet<\/strong>\u00a0There are many features among the reasons why it is so preferred.\u00a0Galvanised sheet<\/strong>, Due to its corrosion resistance, it establishes a barrier to the corrosive elements of the metal in its nature. Its easy shaping feature also causes it to expand its usage areas extremely.The feature serves as the most suitable material for the production of parts that require extra deep drawability and bending. It is frequently used because it provides a flawless surface appearance.<\/p>

Weldability is\u00a0galvanised sheet<\/strong>\u00a0Among the method properties, they can be welded by most welding processes.Also the paintability property\u00a0galvanised sheet<\/strong>\u00a0products can be dyed in a simple way if the preliminary procedures are carried out correctly. The preliminary procedures mentioned here are called degreasing procedures.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t

\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Quality<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

General Area of Use and Main Properties<\/p><\/td>

Standard Provision<\/p><\/td>

ERDEM\u0130R Quality No<\/p><\/td><\/tr>

Standard<\/p><\/td>

Quality<\/p><\/td><\/tr>

Low carbon suitable for cold forming<\/p><\/td>

EN 10346:2015<\/p><\/td>

DX51D+Z<\/strong><\/p><\/td>

1311<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX52D+Z<\/strong><\/p><\/td>

1312<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX53D+Z<\/strong><\/p><\/td>

1313<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX53D+Z<\/p><\/td>

1303<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX54D+Z<\/strong><\/p><\/td>

1314<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX56D+Z<\/strong><\/p><\/td>

1315<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

DX57D+Z<\/strong><\/p><\/td>

1317<\/p><\/td><\/tr>

ASTM A653\/A653M-18<\/p><\/td>

CS TYPE B<\/p><\/td>

1306<\/p><\/td><\/tr>

WSD-M1 A333<\/p><\/td>

A2 DC05<\/p><\/td>

311<\/p><\/td><\/tr>

\u201cZinc-coated\u201d galvanised steels<\/p><\/td>

11-04-013<\/p><\/td>

XE<\/p><\/td>

312<\/p><\/td><\/tr>

WSS-M1 A365<\/p><\/td>

A13<\/p><\/td>

320<\/p><\/td><\/tr>

WSS-M1 A365<\/p><\/td>

A14<\/p><\/td>

321<\/p><\/td><\/tr>

WSD-M1 A333<\/p><\/td>

A3 DC06<\/p><\/td>

323<\/p><\/td><\/tr>

11-04-013<\/p><\/td>

XES<\/p><\/td>

324<\/p><\/td><\/tr>

B53 3106<\/p><\/td>

XSG<\/p><\/td>

325<\/p><\/td><\/tr>

52806\/9.52873<\/p><\/td>

FEP04-ZNT\/F\/2S<\/p><\/td>

326<\/p><\/td><\/tr>

52806\/9.52873<\/p><\/td>

FEP05-ZNT\/F\/2S<\/p><\/td>

327<\/p><\/td><\/tr>

52806\/9.52873<\/p><\/td>

FEP04\/FEP05-ZNT\/F\/2S<\/p><\/td>

328<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

HX180BD+Z<\/p><\/td>

1118<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

HX220BD+Z<\/p><\/td>

1122<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

HX260BD+Z<\/p><\/td>

1126<\/p><\/td><\/tr>

Oven-hardened steels \u201cgalvanised\u201d by coating with zinc<\/p><\/td>

EN 10346:2015<\/p><\/td>

HX300BD+Z<\/p><\/td>

1130<\/p><\/td><\/tr>

52814\/9.52873<\/p><\/td>

FEE 220 BH-ZNT\/F\/2S<\/p><\/td>

380<\/p><\/td><\/tr>

WSS-M1 A367<\/p><\/td>

A22<\/p><\/td>

381<\/p><\/td><\/tr>

WSS-M1 A367<\/p><\/td>

A23<\/p><\/td>

382<\/p><\/td><\/tr>

WSS-M1 A341<\/p><\/td>

A5<\/p><\/td>

383<\/p><\/td><\/tr>

11-04-013<\/p><\/td>

XE260BH<\/p><\/td>

384<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

HX180YD+Z<\/p><\/td>

1518<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

HX220YD+Z<\/p><\/td>

1522<\/p><\/td><\/tr>

IF steel \u201cgalvanised\u201d by coating with zinc<\/p><\/td>

52814<\/p><\/td>

FEE180IF<\/p><\/td>

385<\/p><\/td><\/tr>

52814<\/p><\/td>

FEE210IF<\/p><\/td>

386<\/p><\/td><\/tr>

50002<\/p><\/td>

IF280Y380T<\/p><\/td>

387<\/p><\/td><\/tr>

Steels galvanised by continuous hot-dip zinc coating with high yield strength and suitable for cold forming process<\/p><\/td>

11-04-002\/L<\/p><\/td>

XE280P<\/p><\/td>

388<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

S220GD+Z<\/p><\/td>

1322<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

S250GD+Z<\/p><\/td>

1325<\/p><\/td><\/tr>

\u201cGalvanised\u201d structural steels coated with zinc<\/p><\/td>

EN 10346:2015<\/p><\/td>

S280GD+Z<\/p><\/td>

1328<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

S320GD+Z<\/p><\/td>

1332<\/p><\/td><\/tr>

EN 10346:2015<\/p><\/td>

S350GD+Z<\/p><\/td>

1335<\/p><\/td><\/tr>

WSB-M1 A215-F1<\/p><\/td>

Gr. 250<\/p><\/td>

355<\/p><\/td><\/tr><\/tbody><\/table><\/div>

Chemical Composition (%)<\/strong><\/p><\/td><\/tr>

\u00a0<\/td><\/tr>

Standard Provision<\/p><\/td>

ERDEM\u0130R<\/p>

Quality No<\/p><\/td>

C max.<\/p><\/td>

Si<\/p>

max.<\/p><\/td>

Mn<\/p>

max.<\/p><\/td>

P max.<\/p><\/td>

S max.<\/p><\/td>

Ti<\/p>

max.<\/p><\/td><\/tr>

Standard<\/p><\/td>

Quality<\/p><\/td><\/tr>

EN 10346<\/p><\/td>

DX51D+Z<\/p><\/td>

1311<\/strong><\/p><\/td>

0.18<\/p><\/td>

0.50<\/p><\/td>

1.20<\/p><\/td>

0.12<\/p><\/td>

0.045<\/p><\/td>

0.30<\/p><\/td><\/tr>

EN 10346<\/p><\/td>

DX52D+Z<\/p><\/td>

1312<\/strong><\/p><\/td>

0.12<\/p><\/td>

0.50<\/p><\/td>

0.60<\/p><\/td>

0.10<\/p><\/td>

0.045<\/p><\/td>

0.30<\/p><\/td><\/tr>

EN 10346<\/p><\/td>

DX53D+Z<\/p><\/td>

1313<\/strong><\/p><\/td>

0.12<\/p><\/td>

0.50<\/p><\/td>

0.60<\/p><\/td>

0.10<\/p><\/td>

0.045<\/p><\/td>

0.30<\/p><\/td><\/tr>

EN 10346<\/p><\/td>

DX53D+Z<\/p><\/td>

1303<\/strong><\/p><\/td>

0.12<\/p><\/td>

0.50<\/p><\/td>

0.60<\/p><\/td>

0.10<\/p><\/td>

0.045<\/p><\/td>

0.30<\/p><\/td><\/tr>

EN 10346<\/p><\/td>

DX54D+Z<\/p><\/td>

1314<\/strong><\/p><\/td>

0.12<\/p><\/td>

0.50<\/p><\/td>

0.60<\/p><\/td>

0.10<\/p><\/td>

0.045<\/p><\/td>

0.30<\/p><\/td><\/tr>

EN 10346<\/p>

EN 10346<\/p><\/td>

DX56D+Z<\/p>

DX57D+Z<\/p><\/td>

1315<\/strong><\/p>

1317<\/strong><\/p><\/td>

0.12<\/p>

0.12<\/p><\/td>

0.50<\/p>

0.50<\/p><\/td>

0.60<\/p>

0.60<\/p><\/td>

0.10<\/p>

0.10<\/p><\/td>

0.045<\/p>

0.045<\/p><\/td>

0.30<\/p>

0.30<\/p><\/td><\/tr><\/tbody><\/table><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t<\/polygon>\n<\/svg>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t
\r\n\t\t\r\n\t\t\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t\t\t\t
\r\n\t\t\t\t\t
\r\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Areas of Use<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Galvanised sheet<\/strong>, Its usage areas are extremely high and wide due to its high quality and long life. The fact that it can be brought into different forms allows it to be used in different areas.\u00a0Galvanised sheet<\/strong>, roofing, roof cladding, building facades and interior and exterior cladding, side surfaces, roof cladding in a special form\u00a0sandwich panel<\/strong>\u00a0is used in its function. In addition to this situation\u00a0sheet metal cladding<\/strong>\u00a0It is also used in the following sectors.<\/p>

-Automotive Industry<\/p>

-White Goods Industry<\/p>

-Isolation and Coating Operations<\/p>

-Ventilation and Air Conditioning Plants<\/p>

-Thermosyphon, Stove and Pipe Production<\/p>

-Production of Water and Fuel Tanks<\/p>

-Pipe and Profile Production<\/p>

-Cable Duct and Lighting Fixtures<\/p>

-Cable Industry<\/p>

-Material Goods and Packaging Industry<\/p>

-Prefabricated Building Production<\/p>

-Shed Construction, Silo and Warehouse Construction<\/p>

-Social Structures<\/p>

-Shopping Centres<\/p>

-Agricultural Structures<\/p>

-Site Buildings<\/p>

-Military Facilities<\/p>

-It is a product with an extremely wide usage area such as Hal Facilities.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/div>\r\n\t\t\t\t\t<\/div>\r\n\t\t\t\t<\/section>\r\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

saclar So\u011fuk Haddelenmi\u015f Sac CR’nin \u00e7inko kaplanmas\u0131yla galvanizli sac, kalay kaplanmas\u0131yla teneke elde edilmektedir. CR’nin \u00fcretilmesinden veya galvanizleme prosed\u00fcr\u00fcn\u00fcn ger\u00e7ekle\u015ftirilmesinden sonra, talep do\u011frultusunda sac\u0131n kesilmesi gereklidir. Galvanizli Sac\u0131n \u00d6zellikleri Uzun \u00d6m\u00fcrl\u00fcd\u00fcr, Katland\u0131\u011f\u0131 zaman \u00e7inko kaplamas\u0131 d\u00f6k\u00fclmez, derin \u00e7ekme ve s\u0131vamaya kar\u015f\u0131 elveri\u015flidir, kolay lehim tutar, \u00e7ok basit boyanabilir, ate\u015fe kar\u015f\u0131 dayan\u0131kl\u0131d\u0131r, ekonomiktir, kolayd\u0131r ve bir\u00e7ok […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-3329","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3329","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/comments?post=3329"}],"version-history":[{"count":25,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3329\/revisions"}],"predecessor-version":[{"id":3356,"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/pages\/3329\/revisions\/3356"}],"wp:attachment":[{"href":"https:\/\/torosdemir.com\/en_gb\/wp-json\/wp\/v2\/media?parent=3329"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}