Painted Trapeze

TRAPEZ

Painted Trapeze

It is the form of galvanised or painted products as gutter ridge. Pre-painted trapezoidal sheets are produced with high strength, galvanised thin steel sheet or aluminium, painted with a special painting technology and not directly painted. Painted trapezoidal sheets form the basis of the self-supporting roof and facade cladding systems of hall-style buildings. The multi-layer coating system on the galvanised base material provides the highest level of corrosion protection. It also increases surface resistance by providing the opportunity to choose the most suitable aesthetic appearance with wide coating colour options.

Form : 27-200 - 38-151 - 40-245 - 55-300 - 56-180

Size : 300x300 - 500x500

Thickness : 0,40 - 1,00 mm

Width : 860 - 1000 mm

Length : 1000 - 1300 mm

Usage Areas and Advantages

This single-layer quadrilateral cladding would be a good answer for industrial, agricultural or warehouse buildings that do not require thermal insulation. However, it is possible to use it in areas where it is needed due to changes in internal and external temperature values (condensation). It does not cause problems in cases where the performance of the building will not be interfered with. Apart from these, it is frequently used in sports halls.

Heat insulated halls for, in general, insulated secondary load carrying system (galvanised profiles), with higher and lower with quadrilateral plates made double skin roof connected wall cladding is applied from grease. Deciding on the most important applicable method characteristics of the facade structure (type of insulation and substrate, structural thickness, etc.) requires special, careful temperature and wetness analysis. To reduce sound pollution in the hall, there is a chance to use perforated inner quadrilateral board, as this double wall facade system, from the inside perforated sheet will provide higher sound absorption. Painted trapeze Apart from this, it can also be applied in flat wall structures.

  • On the roofs and walls of shopping centres.
  • Industrial organisations.
  • In buildings built for military purposes.
  • Roofs and structures of farm and vineyard houses.
  • Sports centres.
  • Social facilities.

Features and Advantages

  • Roof and facade quick and simple assembly.
  • Light weight of galvanising It saves carrier construction and allows easy installation.
  • The variety of forms and colours gives the customer a choice.
  • It is environmentally friendly due to its recycling feature.
  • Fireproof and keeps soldering simple.
  • Painted trapezoidal sheet Up to 12 metres can be produced in desired length.
  • Painting on galvanised steel extends the life of the galvanised layer.

Forms

27-200 Trapezoidal Form

27/200 trapezoidal form, is the most economical and most common form. Galvanised sheet or aluminiumfrom coilcoating system with painted or unpainted, 0.50 - 1 mm can be produced in different thicknesses and colours. Net coating area 800 or 1000 mm ‘is.

38-151 Trapezoidal Form

38/151 trapezoidal form, is the ideal form for medium aperture purlins. Galvanised sheet or aluminiumfrom coilcoating system painted or unpainted with, 0.50 - 1 mm can be produced in different thicknesses and colours. Net coating area 906 mm ‘is.

40-245 Trapezoidal Form

40/245 trapezoidal form, is one of the most cost-effective forms for roofing. Galvanised sheet or aluminiumfrom coilcoating system It can be produced in different thicknesses and colours between 0,50 - 1 mm, painted or unpainted. Net coating area is 980 mm.

55-300 Trapezoidal Form

55/300 trapezoidal form, is the most suitable form for large spans and heavy loads on roofs. Galvanised sheet or coilcoating system in aluminium with painted or unpainted, 0.50 - 1 mm can be produced in different thicknesses and colours. Net coating area is 900 mm.

56-180 Trapezoidal Form

56/180 trapezoidal form, Suitable form for large spans and heavy loads on roofs. Galvanised sheet or aluminiumfrom coilcoating system with painted or unpainted, 0.50 - 1 mm can be produced in different thicknesses and colours. Net coating area 720 or 900 mm ‘is.