Hair
Printed Sheet Metal
Printed sheet metal models are products produced with different alternative designs. The method and mechanical properties of printed sheet metal, which is frequently used in the iron and steel industry, may vary according to the type of product you prefer. After passing through a series of procedures, the printed sheets, which finally take the form of sheet metal, are ready to be used efficiently according to their usage areas. Printed sheets, which are highly preferred in domestic and foreign markets, have thicknesses between 0 mm and 2.00 mm. It is known that their lengths can reach up to 4000 mm. Printed sheets, which can reveal a flexible movement area regarding the dimensions, are offered to you according to standard dimensions as well as according to your personal preferences.
Quality
Chemical Composition (%) | ||||||||||
Standard Provision | ERDEMİR | C | Mn | P max. | S max. | Si max. | Cu max. | N4 | CE(IIW)(6) max. (%) | |
Standard | Quality | Quality No | max. | max. | max. | |||||
EN 10025-2 | S235JR+AR Special | 3235(2) | 0,17 | 1,4 | 0.035 | 0.035 | 0,4 | 0,55 | 0.012 | 0,35 |
EN 10025-2 | S275JR+AR Special CTB | 3243(3(7(9 | 0.14-0.20 | 1.00 - 1.35 | 0.025 | 0.025 | 0.15 - 0.25 | 0,55 | 0.012 | 0,4 |
EN 10025-2 | S235JR+AR CTA | 4275811) | 0,17 | 1,2 | 0.025 | 0.035 | 0,03 | 0,55 | 0.012 | 0,35 |
EN 10025-2 | S235J2S235J2+N CTA | 4239(5(8) | 0,17 | 1,4 | 0.025 | 0.025 | 0,03 | 0,55 |
| 0,35 |
EN 10025-2 | S275J2 | 4246(5)7 | 0,18 | 1,5 | 0.025 | 0.025 | - | 0,55 |
| 0,4 |
Explanations
- The quality specified in this table is produced at İsdemir facilities within the framework of agreements with customers.
- In this quality, it is produced in such a way that roll fracture does not occur.
- Mechanical testing is not performed according to production practices.
- In the chemical composition of steel min. %0.020 Al in the chemical composition of steel, the upper limit value of N is not applied.
- These grades are produced in full still and have a minimum Al/N ratio of 2:1.
- The carbon equivalent is calculated according to the formula CEV (IIW) % = C + Mn / 6 + (Cr + Mo + V) / 5 + (Ni + Cu) / 15.
- For S275 and S355 grades, max. carbon equivalent (CEV) is increased by %0.02 for %Si ≤ 0.04 and %0.01 for %Si ≤ 0.25.
- “Suitable for galvanising as ”Category A". In Category A class, a limit of Si ≤ 0.030% and Si+2.5P ≤ 0.090% applies.
- “Suitable for galvanised coating as ”Category B". In Category B class, Si 0.14≤ Si ≤0.25% limit is applied.
- In line with production practices, the suitability for galvanised coating can be accepted subject to negotiation at the order stage. The classes suitable for galvanised coating are applied as Si ≤ 0.030% and Si+2.5P ≤ 0.090% limit in Category A class, Si 0.14≤ Si ≤0.25% limit in Category B class, Si 0.25< Si ≤0.35% limit in Category D class.
- Produced up to max. 8 mm thickness.
Areas of Use
Printed sheets is preferred in different sectors. Printed sheets used on the base surface, Printed sheets, which make non-slip surfaces possible, are also used on walkways, lorry and truck bodies, ramps and ship surfaces and seaside facilities. Printed sheets, which are also used on the exterior of buildings for decoration purposes, are sheets that you can encounter at many different points of daily life.
Printed sheets are products offered to you at world quality standards. The prices of printed sheets, each of which stands out with its different usage area, are priced differently according to the method features of the product you will prefer. Among the prices, there are reasonable price options for every person's budget.
Weight Ruler
Thickness mm | 1000×2000 mm kgs | 1250×2500 mm kgs | 1500×3000 mm kgs |
1.5/2.5 | 27.55 | 43.05 | 61.99 |
2/3 | 35.40 | 55.31 | 79.65 |
3/4 | 51.10 | 79.84 | 114.98 |
4/5 | 66.80 | 104.38 | 150.30 |
5/6 | 82.50 | 128.91 | 185.63 |
6/7 | 98.20 | 153.44 | 220.95 |
7/8 | 113.90 | 177.97 | 256.28 |
8/9 | 129.60 | 202.50 | 291.60 |
9/10 | 145.30 | 227.03 | 326.93 |
10/11 | 161.00 | 251.56 | 362.25 |
12/13 | 192.40 | 306.63 | 432.90 |